AirTAC TACE32 Guided Compact Cylinder, 32 mm Bore
Every AirTAC TACE32 configuration on one page: 36 stock order codes with strokes from 5 to 100 mm and 2 mountings, from $49.99. Pick a stroke, mounting and version to see the exact order code and price.
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC TACE32
The AirTAC TACE32 is a double-acting compact cylinder with a 32 mm bore and a 12 mm piston rod. At 0.5 MPa it pushes 402 N and pulls 346 N; at 0.7 MPa that rises to 563 N push and 484 N pull. Force depends on bore and pressure only, so every stroke on this page gives the same output. AirTAC builds the TACE32 as the guide-rod version of the ACE compact cylinder (double-acting with guide rods); its order codes have no rod-end thread option.
All TACE32 versions share 1/8" air ports and rubber bumpers at both ends. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 500 mm/s. This page lists 36 stock order codes with strokes from 5 to 100 mm; the catalog maximum stroke is 100 mm.
TACE32 Technical Specifications
| Bore size | Ø32 mm |
|---|---|
| Stock strokes | 5 – 100 mm |
| Catalog maximum stroke | 100 mm (longer on request) |
| Acting type | Double acting, with guide rods |
| Port size | 1/8" (PT standard) |
| Piston rod | Ø12 mm |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Rubber bumper at both ends |
Source: AirTAC Products Catalog 2026A (PDF01-P0469), ACE series (TACE) ordering code and specifications.
Theoretical output force (Ø32 mm)
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
Push = pressure × bore area; pull subtracts the Ø12 mm rod area. Usable force is lower because of friction and back-pressure.
How the TACE32 Order Code Is Built
| TACE32 | Series and bore (32 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| FB / CA / CB / CR / FTC | Mounting: FB rear flange; CA single clevis; CB double clevis; CR rear pin clevis; FTC front trunnion (blank = none) |
| G | Port thread: G = G (BSPP), blank = PT |
All AirTAC TACE32 Order Codes (36)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Thread | Price | Select |
|---|---|---|---|---|---|
| TACE32X5 | 5 mm | Basic (no mounting) | - · PT | $49.99 | |
| TACE32X5S | 5 mm | Basic (no mounting) | S · PT | $51.81 | |
| TACE32X10 | 10 mm | Basic (no mounting) | - · PT | $50.70 | |
| TACE32X10S | 10 mm | Basic (no mounting) | S · PT | $52.51 | |
| TACE32X15 | 15 mm | Basic (no mounting) | - · PT | $51.61 | |
| TACE32X15S | 15 mm | Basic (no mounting) | S · PT | $53.42 | |
| TACE32X20 | 20 mm | Basic (no mounting) | - · PT | $52.26 | |
| TACE32X20S | 20 mm | Basic (no mounting) | S · PT | $54.08 | |
| TACE32X25 | 25 mm | Basic (no mounting) | - · PT | $53.17 | |
| TACE32X25S | 25 mm | Basic (no mounting) | S · PT | $54.99 | |
| TACE32X25FB | 25 mm | FB rear flange | - · PT | $59.07 | |
| TACE32X30 | 30 mm | Basic (no mounting) | - · PT | $53.88 | |
| TACE32X30S | 30 mm | Basic (no mounting) | S · PT | $55.69 | |
| TACE32X35 | 35 mm | Basic (no mounting) | - · PT | $54.78 | |
| TACE32X35S | 35 mm | Basic (no mounting) | S · PT | $56.60 | |
| TACE32X40 | 40 mm | Basic (no mounting) | - · PT | $55.44 | |
| TACE32X40S | 40 mm | Basic (no mounting) | S · PT | $57.26 | |
| TACE32X45 | 45 mm | Basic (no mounting) | - · PT | $56.35 | |
| TACE32X45S | 45 mm | Basic (no mounting) | S · PT | $58.17 | |
| TACE32X50 | 50 mm | Basic (no mounting) | - · PT | $57.06 | |
| TACE32X50S | 50 mm | Basic (no mounting) | S · PT | $58.87 | |
| TACE32X55 | 55 mm | Basic (no mounting) | - · PT | $57.96 | |
| TACE32X55S | 55 mm | Basic (no mounting) | S · PT | $59.78 | |
| TACE32X60 | 60 mm | Basic (no mounting) | - · PT | $58.62 | |
| TACE32X60S | 60 mm | Basic (no mounting) | S · PT | $60.43 | |
| TACE32X65S | 65 mm | Basic (no mounting) | S · PT | $62.05 | |
| TACE32X70 | 70 mm | Basic (no mounting) | - · PT | $60.23 | |
| TACE32X70S | 70 mm | Basic (no mounting) | S · PT | $62.05 | |
| TACE32X75 | 75 mm | Basic (no mounting) | - · PT | $61.14 | |
| TACE32X75S | 75 mm | Basic (no mounting) | S · PT | $62.96 | |
| TACE32X80 | 80 mm | Basic (no mounting) | - · PT | $61.80 | |
| TACE32X80S | 80 mm | Basic (no mounting) | S · PT | $63.61 | |
| TACE32X90 | 90 mm | Basic (no mounting) | - · PT | $63.41 | |
| TACE32X90S | 90 mm | Basic (no mounting) | S · PT | $65.23 | |
| TACE32X100 | 100 mm | Basic (no mounting) | - · PT | $64.97 | |
| TACE32X100S | 100 mm | Basic (no mounting) | S · PT | $66.79 |
Need a combination that is not listed? Request a quote.
Where the TACE32 Is Used
General automation
About 402 N at 0.5 MPa covers most pushing, lifting and indexing tasks.
Clamping fixtures
Rigid mountings hold the cylinder for clamps and presses.
Doors, gates and levers
Pivoting covers and brackets drive mechanisms that swing.
Choosing the Right TACE32 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the mounting. Basic (no code) uses the cylinder's own mounting holes. This bore is stocked with FB rear flange. Foot and flange mountings hold the cylinder rigid for straight-line loads; clevis and trunnion mountings let it pivot when the load moves in an arc.
Finally pick the version: S adds a magnet for position sensors.
AirTAC TACE32 FAQ
No. Every TACE32 gives about 402 N push and 346 N pull at 0.5 MPa, whatever the stroke.
1/8" ports, PT thread as standard.
Brackets: FB rear flange. Pick a pivoting cover or bracket when the load moves in an arc, a rigid one for straight-line loads.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single TACE32. Orders are processed and handed to the carrier within 3-5 business days.
Buying the TACE32 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Request a Quote for the TACE32
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.