Airtac TACE Guided Compact Cylinder TACE32X100S
The AirTAC Airtac TACE Guided Compact Cylinder TACE32X100S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 100mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE32X100S
A double acting, non-rotating compact cylinder built to ISO 21287, the TACE32X100S pairs a 32 mm bore with a full 100 mm stroke in a body that saves about 50% of the mounting length of an ISO 15552 profile cylinder. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those figures rise to 563 N push and 483.8 N pull, with a theoretical maximum of 82 kgf at 1.0 MPa. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without any external guide.
For real work at 0.5 MPa, plan on roughly 241 N - about 60% of the push rating - which lifts around 20 kg vertically with a 2:1 margin. The hard-anodized aluminium body runs a hard-chrome plated S45C rod, a fixed TPU bumper absorbs end-of-stroke energy at both ends, and the fitted -S magnet accepts CMSE / DMSE switches for end-position feedback. Supply air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, 1/8" PT port, female rod thread M8x1.25.
Airtac TACE Guided Compact Cylinder TACE32X100S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE32X100S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE32X100S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE32X100S Is Used
Weld fixture clamping
Clamping a steel bracket in an automotive weld jig at up to 402.1 N, with the 100 mm stroke retracting the clamp arm fully clear for robot loading.
Bottling line diverting
Driving a pusher that moves PET bottles between lanes; the twin-guide yoke keeps the paddle square to the product stream under light side load.
Gripper actuation
Closing a two-jaw gripper on machined housings in a pick-and-place cell - the non-rotating guide rods hold jaw alignment without an external guide.
Is the Airtac TACE Guided Compact Cylinder TACE32X100S the Right Cylinder?
At 0.5 MPa this 32 mm bore pushes 402.1 N - if your load needs less, the 25 mm bore delivers 245.4 N in the same short-body format; if it needs more, step up to the 40 mm bore at 628.3 N. The piston drifts when air is lost, so for a load that must stay clamped add a rod lock or pilot check valve. Mount with an FB flange, CA/CB clevis, CR or FTC, and note this model already carries the -S magnet that enables CMSE / DMSE switch mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE32X100S FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa push is 563 N and pull is 483.8 N. The theoretical maximum is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed runs 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Mounting options are FB flange, CA/CB clevis, CR and FTC. This model carries the -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped into the body slots for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE32X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.