Airtac TACE Guided Compact Cylinder TACE32X10
The AirTAC Airtac TACE Guided Compact Cylinder TACE32X10 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE32X10
The TACE32X10 is a double acting, non-rotating compact cylinder built to ISO 21287: a 32 mm bore with a 10 mm stroke, a 12 mm hard-chrome-plated S45C rod and a 1/8" PT port. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N.
The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it drops into tight jigs, guards and gantries. Plan on roughly 241 N of usable push at 0.5 MPa; in vertical terms this bore lifts about 41 kg, or about 20 kg with a 2:1 margin. A fixed TPU bumper absorbs end-of-stroke energy, and the optional -S magnet enables CMSE / DMSE switches.
Airtac TACE Guided Compact Cylinder TACE32X10 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE32X10 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE32X10
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE32X10 Is Used
Conveyor stopper
A 10 mm pop-up stopper on an electronics assembly conveyor, where the twin-guide yoke keeps the stop blade square to the product flow at 402.1 N push.
Fixture eject pin
Ejecting a finished aluminium bracket from a machining fixture: the short 10 mm stroke clears the part quickly, and about 241 N of usable push at 0.5 MPa does the work.
Low-profile clamp
Clamping a lid during an adhesive cure station - the compact body fits under a low guard, and the bore lifts about 20 kg vertically with a 2:1 margin.
Is the Airtac TACE Guided Compact Cylinder TACE32X10 the Right Cylinder?
For a 10 mm stroke, bore 32 gives 402.1 N push at 0.5 MPa; drop to bore 25 (245.4 N push) for lighter clamps or step up to bore 40 (628.3 N push) when the load grows. Air pressure runs 0.15-1.0 MPa (22-145 psi) and speed 30-500 mm/s. The piston does not hold position when air is lost - it drifts - so fit a rod lock or pilot check valve for a held load. Mounting: FB flange, CA/CB clevis, CR or FTC; order the -S code if you need the optional magnet for CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE32X10 FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa it pushes 563 N and pulls 483.8 N. The theoretical maximum is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed 30-500 mm/s.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, threaded aluminium covers and a fixed TPU bumper at both ends; the body saves about 50% of the mounting length of an ISO 15552 profile cylinder. Sensors need the optional -S magnet code - without it no magnet is fitted, so CMSE / DMSE switches cannot be mounted. Mounting options are FB, CA, CB, CR and FTC, and the female rod thread is M8x1.25.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE32X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.