Airtac TACE Guided Compact Cylinder TACE32X75S
The AirTAC Airtac TACE Guided Compact Cylinder TACE32X75S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE32X75S
The TACE32X75S is a double acting, non-rotating ISO 21287 compact cylinder with a 32 mm bore and 75 mm stroke. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those figures rise to 563 N and 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa.
Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guards and gantries. Because this model carries the -S code, the magnet is fitted and CMSE / DMSE reed or solid-state switches can be seated along the body slots for end-of-stroke signalling. A fixed TPU bumper at each end absorbs end-of-stroke energy. For sizing, plan on roughly 241 N of usable force at 0.5 MPa (about 60% of the push rating), which lifts about 20 kg vertically with a 2:1 margin.
Airtac TACE Guided Compact Cylinder TACE32X75S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE32X75S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE32X75S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE32X75S Is Used
Electronics gripper station
On a PCB handling cell, the twin-guide yoke keeps a suction gripper square over a 75 mm vertical transfer while the 402.1 N push at 0.5 MPa covers fixture and part weight with margin.
Carton divert pusher
Mounted across a packaging conveyor, the 75 mm stroke kicks cartons into a lane; the non-rotating rods keep the pusher plate flat against the box face without an external guide.
CNC fixture clamp
Clamping aluminium housings in a machining jig, the 32 mm bore delivers 563 N at 0.7 MPa, and the fitted -S magnet feeds a CMSE switch back to the PLC for clamp-confirmed interlocking.
Is the Airtac TACE Guided Compact Cylinder TACE32X75S the Right Cylinder?
Compare against neighbours before you commit: the 25 mm bore pushes 245.4 N at 0.5 MPa, while stepping up to the 40 mm bore gives 628.3 N. If your load needs more than about 241 N of real work at 0.5 MPa, the 32 mm bore with 75 mm stroke is the right class. Remember the rod drifts when air is lost - it never locks or brakes - so add a rod lock or pilot check valve for a held load.
Mounting choices are FB flange, CA/CB clevis, CR and FTC; there is no rod-thread code on the yoke, and the rod end carries a female M8x1.25 thread. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and the 1/8" port depends only on the 32 mm bore. The -S magnet on this unit lets you add CMSE / DMSE switches anywhere along the body.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE32X75S FAQ
At 0.5 MPa the 32 mm bore pushes 402.1 N and pulls 345.6 N. At 0.7 MPa push rises to 563 N and pull to 483.8 N. The theoretical maximum at 1.0 MPa is 82 kgf. Operating pressure spans 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi), running at 30-500 mm/s on air filtered to 40 um.
It is an ISO 21287 compact cylinder whose hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with an S45C hard-chrome rod and a fixed TPU bumper at each end. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped into the body slots. Mounting options are FB flange, CA/CB clevis, CR and FTC, the rod end is female M8x1.25, and the port is 1/8" PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE32X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.