Airtac TACE Guided Compact Cylinder TACE32X45S
The AirTAC Airtac TACE Guided Compact Cylinder TACE32X45S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 45mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke45 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE32X45S
The TACE32X45S is a double acting, non-rotating compact cylinder built to ISO 21287, pairing a 32 mm bore and 45 mm stroke with a 12 mm hard-chrome plated S45C rod and a 1/8" PT port. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those figures rise to 563 N and 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight jigs, guards and gantries.
For real-world sizing, plan on roughly 241 N of usable work at 0.5 MPa - about 0.6 of the push rating - which lifts about 20 kg vertically with a 2:1 margin. Because this model carries the -S code, the magnet is fitted and CMSE / DMSE reed or solid-state switches can be seated directly in the body slots for end-of-stroke signalling. A fixed TPU bumper at each end absorbs end-of-stroke energy, speed spans 30-500 mm/s, and the operating window is 0.15-1.0 MPa (22-145 psi) on air filtered to 40 um.
Airtac TACE Guided Compact Cylinder TACE32X45S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE32X45S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE32X45S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE32X45S Is Used
CNC fixture clamping
Clamps aluminium brackets on a milling jig: 402.1 N at 0.5 MPa holds the part down while the twin-guide yoke keeps the clamp pad from twisting under side load.
Packaging pick-and-place
A 45 mm stroke lifts blister trays between a conveyor and a carton magazine; the usable vertical margin of about 20 kg covers tray plus product with room to spare.
Bearing press on electronics assembly
Presses small bearings into pump housings at 563 N push at 0.7 MPa, with CMSE / DMSE switches confirming the 45 mm return stroke each cycle.
Is the Airtac TACE Guided Compact Cylinder TACE32X45S the Right Cylinder?
If 402.1 N of push at 0.5 MPa is more than the task needs, drop to the 25 mm bore, which delivers 245.4 N; if the load grows, the 40 mm bore gives 628.3 N at the same pressure. Keep in mind the rod drifts when air is lost, so for a load that must stay put add a rod lock or pilot check valve downstream. Mount with an FB flange, CA/CB clevis, CR or FTC feet, and rely on the fitted -S magnet with CMSE / DMSE switches for position feedback. The 45 mm stroke sits well inside the 200 mm standard range for this bore, so no made-to-order build is needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE32X45S FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N. At 0.7 MPa the push rises to 563 N and the pull to 483.8 N. The theoretical maximum is 82 kgf at 1.0 MPa. For sizing, count on about 241 N of real work at 0.5 MPa, which lifts roughly 20 kg vertically with a 2:1 margin. Operating pressure is 0.15-1.0 MPa (22-145 psi) and speed is 30-500 mm/s.
It is an ISO 21287 compact build: the hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow guards and tight gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy, and mounting options include FB flange, CA/CB clevis, CR and FTC. This model carries the optional -S magnet, so CMSE / DMSE switches can be clipped into the body slots; the rod end is a female M8x1.25 thread on a 12 mm rod with a 1/8" PT port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE32X45S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.