Airtac TACE Guided Compact Cylinder TACE32X90
The AirTAC Airtac TACE Guided Compact Cylinder TACE32X90 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke90 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE32X90
The TACE32X90 is a double acting, non-rotating compact cylinder built to ISO 21287: a 32 mm bore with a 90 mm stroke, a hard-anodized aluminium body and an S45C hard-chrome-plated 12 mm rod. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those figures rise to 563 N push and 483.8 N pull, with a theoretical peak of 82 kgf at 1.0 MPa.
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guards and gantries. Plan for roughly 241 N of real work at 0.5 MPa (about 60% of the push rating), which lifts about 20 kg vertically with a 2:1 margin. Air to both ports drives extend and retract between 30 and 500 mm/s, a fixed TPU bumper absorbs end-of-stroke shock at each end, and the optional -S magnet adds CMSE / DMSE switch sensing. Operating range is 0.15-1.0 MPa (22-145 psi), -20 to +70 C, with 1/8" PT ports.
Airtac TACE Guided Compact Cylinder TACE32X90 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE32X90 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE32X90
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE32X90 Is Used
Bearing press in pump housings
The 402.1 N push at 0.5 MPa presses small bearings into aluminium pump housings on an assembly line, while the twin-guide yoke keeps the arbor square to the bore.
Gripper drive on pick-and-place cells
A 90 mm stroke opens and closes a two-jaw gripper handling castings of about 20 kg vertically with a 2:1 margin; the twin guide rods stop the jaw plate rotating.
Fixture clamping on CNC jigs
Clamps a steel fixture plate inside a tight milling guard, where the short ISO 21287 body fits into a jig that a full-length cylinder cannot reach.
Is the Airtac TACE Guided Compact Cylinder TACE32X90 the Right Cylinder?
For a 90 mm stroke at 0.5 MPa, the 32 mm bore pushes 402.1 N - enough for clamping and light pressing work. Step down to the 25 mm bore (245.4 N push) for lighter fixtures, or up to the 40 mm bore (628.3 N push) when the job needs more force. The rod drifts when air is lost, so add a rod lock or pilot check valve wherever a load must stay held. Mount with an FB flange, CA/CB clevis, CR or FTC, and order the -S code if CMSE / DMSE switch sensing is planned.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE32X90 FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa, 563 N push and 483.8 N pull. The theoretical maximum is 82 kgf at 1.0 MPa. For comparison, the smaller 25 mm bore reaches 245.4 N at 0.5 MPa and the larger 40 mm bore reaches 628.3 N, so you can size up or down within the same compact family.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Mounting choices are FB flange, CA/CB clevis, CR and FTC. Sensing requires the optional -S magnet, which enables CMSE / DMSE switches; without the -S code no magnet is fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE32X90
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.