Airtac TACE Guided Compact Cylinder TACE32X50S
The AirTAC Airtac TACE Guided Compact Cylinder TACE32X50S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 50mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE32X50S
Air pressure extends and retracts the rod on the TACE32X50S, a double acting compact cylinder built to the ISO 21287 short-body format. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide. The 32 mm bore delivers 402.1 N push and 345.6 N pull at 0.5 MPa, rising to 563 N push at 0.7 MPa, through a 12 mm hard-chrome-plated S45C rod with a female M8x1.25 thread. Air ports are 1/8" PT, operating pressure is 0.15-1.0 MPa (22-145 psi) and speed runs 30-500 mm/s.
The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guards and gantries where a full-length body will not. Fixed TPU bumpers at both ends absorb end-of-stroke shock. Because this model carries the -S magnet code, CMSE or DMSE reed and solid-state switches can be mounted directly in the body slots. For planning: keep real work to about 241 N at 0.5 MPa (roughly 0.6 of the push figure), and expect a vertical lift of about 20 kg with a 2:1 margin - the theoretical maximum is 82 kgf at 1.0 MPa.
Airtac TACE Guided Compact Cylinder TACE32X50S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE32X50S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE32X50S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE32X50S Is Used
Pick-and-place on an electronics gantry
The twin-guide yoke keeps a vacuum plate square over a PCB tray, and the 20 kg vertical-lift margin covers tray plus payload at 0.5 MPa inside a tight machine envelope.
Carton clamp on a packaging line
402.1 N of push at 0.5 MPa holds flaps closed during taping, and the short ISO 21287 body fits stations where a full-length profile cylinder will not.
Reject gate on a bottling conveyor
A 50 mm stroke pushes off-spec bottles clear of the lane; the non-rotating plate stays aligned cycle after cycle, with the fitted -S magnet feeding CMSE switches to confirm each reject.
Is the Airtac TACE Guided Compact Cylinder TACE32X50S the Right Cylinder?
At 32 mm this sits mid-range: the 25 mm bore gives 245.4 N push at 0.5 MPa for lighter clamping, while the 40 mm bore reaches 628.3 N when the job needs more grip. The 50 mm stroke is well inside the 200 mm maximum standard stroke for this bore, so it ships as a catalogue item. The piston drifts if air is lost - it is not a lock - so add a rod lock or pilot check valve where a load must stay put. FB flange, CA/CB clevis, CR and FTC mountings are available, and the fitted -S magnet lets CMSE / DMSE switches report end positions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE32X50S FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa push rises to 563 N and pull to 483.8 N. The theoretical maximum is 82 kgf at 1.0 MPa. For sizing, plan on about 241 N of usable push at 0.5 MPa, which corresponds to roughly a 20 kg vertical lift with a 2:1 margin.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, threaded aluminium covers and a hard-chrome-plated S45C rod, saving about 50% of the mounting length of an ISO 15552 profile cylinder. Fixed TPU bumpers at each end absorb end-of-stroke energy. Mounting options are FB, CA, CB, CR and FTC. This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clipped into the body slots for end-of-stroke signals.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE32X50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.