Airtac TACE Guided Compact Cylinder TACE32X75
The AirTAC Airtac TACE Guided Compact Cylinder TACE32X75 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE32X75
Double acting and non-rotating, the AirTAC TACE32X75 packs a 32 mm bore and a 75 mm stroke into an ISO 21287 compact body: a 12 mm hard-chrome-plated S45C rod is fed through a 1/8" PT port. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa that rises to 563 N push and 483.8 N pull, with a theoretical maximum of 82 kgf at 1.0 MPa.
The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length cylinder will not fit. Plan on roughly 241 N of usable push at 0.5 MPa - about 60% of the rating - which lifts about 20 kg vertically with a 2:1 margin. A fixed TPU bumper absorbs end-of-stroke energy at both ends, and the optional -S magnet enables CMSE / DMSE switches; this version ships without it.
Airtac TACE Guided Compact Cylinder TACE32X75 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE32X75 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE32X75
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE32X75 Is Used
CNC fixture clamping
The 402.1 N push at 0.5 MPa clamps aluminium brackets in a drilling jig, and the 75 mm stroke leaves room to load parts by hand.
Carton flap tuck station
Twin guide rods keep the press plate square as it folds flaps on a small-box packing line running at up to 500 mm/s.
Bench-top reject pusher
Fitted under a conveyor guard, the short body kicks off-spec bottles into a bin while the 345.6 N pull retracts the blade promptly.
Is the Airtac TACE Guided Compact Cylinder TACE32X75 the Right Cylinder?
If 402.1 N of push at 0.5 MPa is more than the job needs, the bore 25 TACE gives 245.4 N; if the load is heavier, step up to bore 40 for 628.3 N. The 75 mm stroke sits inside the standard range for this bore, so no made-to-order build is required. Remember the piston drifts when air is lost - it never holds or brakes a load - so add a rod lock or pilot check valve where a position must be kept. Mount with an FB flange, CA or CB clevis, CR or FTC, and order the -S suffix only if CMSE / DMSE position switches are planned.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE32X75 FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N. At 0.7 MPa the figures are 563 N push and 483.8 N pull, and the theoretical maximum is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with speed 30-500 mm/s.
It is an ISO 21287 compact cylinder whose hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end absorbing end-of-stroke impact. Mounting choices are FB flange, CA/CB clevis, CR and FTC. Position sensing requires the optional -S magnet ordered together with CMSE or DMSE switches - this model has no magnet fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE32X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.