AirTAC SGD160 Double-Rod Steel-Barrel Cylinder, 160 mm Bore
Every AirTAC SGD160 configuration on one page: 22 stock order codes with strokes from 25 to 1000 mm and 2 mountings, from $330.31. Pick a stroke, mounting and version to see the exact order code and price.
NBR · PT
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC SGD160
The AirTAC SGD160 is a double-rod, double-acting steel-barrel large-bore ISO cylinder with a 160 mm bore and a 40 mm piston rod. The rod runs through both end covers, so push and pull are equal: 9425 N at 0.5 MPa and 13195 N at 0.7 MPa. Force depends on bore and pressure only, so every stroke on this page gives the same output.
All SGD160 versions share 3/4" air ports, an M36×2.0 rod thread and 50 mm adjustable air cushions. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 500 mm/s. This page lists 22 stock order codes with strokes from 25 to 1000 mm; the catalog maximum stroke is 1000 mm.
SGD160 Technical Specifications
| Bore size | Ø160 mm |
|---|---|
| Stock strokes | 25 – 1000 mm |
| Catalog maximum stroke | 1000 mm (longer on request) |
| Acting type | Double acting, double rod |
| Port size | 3/4" (PT standard) |
| Piston rod / rod thread | Ø40 mm / M36×2.0 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable air cushion, 50 mm |
| Barrel | Steel tube (no sensor magnet) |
| Seal | NBR standard; H = FKM |
Source: AirTAC Products Catalog 2026A (PDF01-P0407/P0408), SG/SGC series (SGD) ordering code and specifications. With FKM (H) seals the range is 0 to +150 °C.
Theoretical output force (Ø160 mm)
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | 13195 N |
Both directions act on the bore area minus the Ø40 mm rod area, because the rod passes through both end covers. Usable force is lower because of friction and back-pressure.
How the SGD160 Order Code Is Built
| SGD160 | Series and bore (160 mm) |
|---|---|
| X100 | Stroke in mm |
| LB / FA / TC / FTC | Mounting: LB foot; FA front flange; TC center trunnion; FTC front trunnion (blank = none) |
| H | Seal: H = FKM (blank = NBR) |
| G | Port thread: G = G (BSPP), blank = PT |
All AirTAC SGD160 Order Codes (22)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Seal · Thread | Price | Select |
|---|---|---|---|---|---|
| SGD160X25 | 25 mm | Basic (no mounting) | NBR · PT | $330.31 | |
| SGD160X50 | 50 mm | Basic (no mounting) | NBR · PT | $337.29 | |
| SGD160X75 | 75 mm | Basic (no mounting) | NBR · PT | $348.45 | |
| SGD160X80 | 80 mm | Basic (no mounting) | NBR · PT | $359.62 | |
| SGD160X100 | 100 mm | Basic (no mounting) | NBR · PT | $359.62 | |
| SGD160X125 | 125 mm | Basic (no mounting) | NBR · PT | $370.58 | |
| SGD160X150 | 150 mm | Basic (no mounting) | NBR · PT | $381.75 | |
| SGD160X160 | 160 mm | Basic (no mounting) | NBR · PT | $392.91 | |
| SGD160X175 | 175 mm | Basic (no mounting) | NBR · PT | $392.91 | |
| SGD160X200 | 200 mm | Basic (no mounting) | NBR · PT | $404.08 | |
| SGD160X250 | 250 mm | Basic (no mounting) | NBR · PT | $426.16 | |
| SGD160X300 | 300 mm | Basic (no mounting) | NBR · PT | $448.03 | |
| SGD160X300FA | 300 mm | FA front flange | NBR · PT | $524.79 | |
| SGD160X350 | 350 mm | Basic (no mounting) | NBR · PT | $470.36 | |
| SGD160X400 | 400 mm | Basic (no mounting) | NBR · PT | $492.49 | |
| SGD160X450 | 450 mm | Basic (no mounting) | NBR · PT | $514.56 | |
| SGD160X500 | 500 mm | Basic (no mounting) | NBR · PT | $536.89 | |
| SGD160X600 | 600 mm | Basic (no mounting) | NBR · PT | $583.42 | |
| SGD160X700 | 700 mm | Basic (no mounting) | NBR · PT | $630.21 | |
| SGD160X800 | 800 mm | Basic (no mounting) | NBR · PT | $676.47 | |
| SGD160X900 | 900 mm | Basic (no mounting) | NBR · PT | $723.00 | |
| SGD160X1000 | 1000 mm | Basic (no mounting) | NBR · PT | $769.79 |
Need a combination that is not listed? Request a quote.
Where the SGD160 Is Used
High-force actuation
Over 9.4 kN at 0.5 MPa for presses, lifting tables and dampers.
Process and material handling
Opens chutes, gates and dampers on bulk-handling equipment.
Pivoting heavy loads
Clevis and trunnion versions swing large doors and platforms.
Choosing the Right SGD160 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the mounting. Basic (no code) uses the cylinder's own mounting holes. This bore is stocked with FA front flange. Foot and flange mountings hold the cylinder rigid for straight-line loads; clevis and trunnion mountings let it pivot when the load moves in an arc.
Finally pick the version: the steel barrel takes no sensor magnet.
AirTAC SGD160 FAQ
No. Every SGD160 gives about 9425 N in both directions at 0.5 MPa, whatever the stroke.
3/4" ports, PT thread as standard.
Brackets: FA front flange. Pick a pivoting cover or bracket when the load moves in an arc, a rigid one for straight-line loads.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single SGD160. Orders are processed and handed to the carrier within 3-5 business days.
Buying the SGD160 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-09.
Request a Quote for the SGD160
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.