AirTAC SAUF32 Valve-Mounted Standard Cylinder, 32 mm Bore

The AirTAC SAUF32 is a double-acting valve-mounted standard cylinder with a 32 mm bore and a 12 mm piston rod. At 0.5 MPa it pushes 402 N and pulls 346 N; at 0.7 MPa that rises to 563 N push and 484 N pull. Force depends on bore and pressure only, so every stroke on this page gives the same output.

All SAUF32 versions share 1/8" air ports, an M10×1.25 rod thread and 21 mm adjustable air cushions. The cylinder runs on filtered air between 0.15 and 0.8 MPa (the cylinder alone is rated to 1.0 MPa and 1.5 MPa proof), from -20 to +70 °C, at 30 to 800 mm/s. This page lists 128 stock order codes with strokes from 50 to 500 mm; catalog standard strokes run up to 1000 mm.

The SAUF32 comes with an AirTAC 4M210 5/2 solenoid valve (internally piloted) mounted on the cylinder and piped to both ports with Ø8 × Ø5 mm PU tube, so there is no separate valve, fitting or tubing to install. The digits after the dash choose the valve port (06 = 1/8", 08 = 1/4", i.e. 4M210-06 or 4M210-08) and the letter after them the coil voltage; every code here has the DIN connector. The coil draws AC 3.5 VA or DC 3.0 W, is rated IP65 and responds in 0.05 s or less; the valve needs no lubrication and switches up to 5 times per second. Minimum stroke is 50 mm.