AirTAC SCF100 Valve-Mounted Tie-Rod Cylinder, 100 mm Bore

The AirTAC SCF100 is a double-acting valve-mounted tie-rod cylinder with a 100 mm bore and a 25 mm piston rod. At 0.5 MPa it pushes 3927 N and pulls 3682 N; at 0.7 MPa that rises to 5498 N push and 5154 N pull. Force depends on bore and pressure only, so every stroke on this page gives the same output.

All SCF100 versions share 1/2" air ports, an M20×1.5 rod thread and 29 mm adjustable air cushions. The cylinder runs on filtered air between 0.15 and 0.8 MPa (the cylinder alone is rated to 1.0 MPa and 1.5 MPa proof), from -20 to +70 °C, at 30 to 800 mm/s. This page lists 107 stock order codes with strokes from 75 to 1000 mm; catalog standard strokes run up to 1500 mm.

The SCF100 comes with an AirTAC 4M310 5/2 solenoid valve (internally piloted) mounted on the cylinder and piped to both ports with Ø10 × Ø6.5 mm PU tube, so there is no separate valve, fitting or tubing to install. The digits after the dash choose the valve port (08 = 1/4", 10 = 3/8", i.e. 4M310-08 or 4M310-10) and the letter after them the coil voltage; a trailing I gives a lead-wire coil instead of the DIN connector. The coil draws AC 3.5 VA or DC 3.0 W, is rated IP65 and responds in 0.05 s or less; the valve needs no lubrication and switches up to 4 times per second. Minimum stroke is 75 mm (125 mm with the TC trunnion).