AirTAC BSAID80 Double-Rod Rod-Lock Cylinder, 80 mm Bore
Every AirTAC BSAID80 configuration on one page: 44 stock order codes with strokes from 25 to 1000 mm, magnet versions, from $376.37. Pick a stroke and version to see the exact order code and price.
Basic (no mounting)
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC BSAID80
The AirTAC BSAID80 is a double-rod, double-acting rod-lock ISO 15552 cylinder with an 80 mm bore and a 25 mm piston rod. The rod runs through both end covers, so push and pull are equal: 2268 N at 0.5 MPa and 3175 N at 0.7 MPa. Force depends on bore and pressure only, so every stroke on this page gives the same output.
All BSAID80 versions share 3/8" air ports, an M20×1.5 rod thread and 36 mm adjustable air cushions. The cylinder runs on filtered air between 0.15 and 0.7 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 800 mm/s. This page lists 44 stock order codes with strokes from 25 to 1000 mm; catalog standard strokes run up to 1000 mm.
The BSAID80 is the SAID double-rod ISO cylinder with a compact clamping unit built in. Springs apply clamp plates to the piston rod and air releases them, so the rod can be locked at any point of the stroke, in either direction and whether it is extended or retracted. Static holding force at this bore is 3600 N. The clamp has its own G1/8 port and releases at 0.15 to 0.7 MPa; it can also be released by hand. The holding force is a static rating: stop the rod first, then clamp it.
BSAID80 Technical Specifications
| Bore size | Ø80 mm |
|---|---|
| Stock strokes | 25 – 1000 mm |
| Catalog standard stroke | up to 1000 mm (longer on request) |
| Acting type | Double acting, double rod, with rod lock |
| Static holding force | 3600 N |
| Rod lock | Spring applied, air released (G1/8 port, 0.15 – 0.7 MPa); manual release |
| Port size | 3/8" (PT standard) |
| Piston rod / rod thread | Ø25 mm / M20×1.5 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Source: AirTAC Products Catalog 2026A (PDF01-P0381), BSAID specifications and ordering code; body as SAI.
Theoretical output force (Ø80 mm)
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
Both directions act on the bore area minus the Ø25 mm rod area, because the rod passes through both end covers. Usable force is lower because of friction and back-pressure.
How the BSAID80 Order Code Is Built
| B | Rod-lock (clamp) cylinder |
|---|---|
| SAID | Series: SAID double-rod ISO cylinder |
| 80 | Bore in mm |
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| - | Mounting: basic only |
| G | Port thread: G = G (BSPP), blank = PT |
All AirTAC BSAID80 Order Codes (44)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Thread | Price | Select |
|---|---|---|---|---|---|
| BSAID80X25 | 25 mm | Basic (no mounting) | - · PT | $376.37 | |
| BSAID80X25S | 25 mm | Basic (no mounting) | S · PT | $381.95 | |
| BSAID80X50 | 50 mm | Basic (no mounting) | - · PT | $378.96 | |
| BSAID80X50S | 50 mm | Basic (no mounting) | S · PT | $384.54 | |
| BSAID80X75 | 75 mm | Basic (no mounting) | - · PT | $383.14 | |
| BSAID80X75S | 75 mm | Basic (no mounting) | S · PT | $388.73 | |
| BSAID80X80 | 80 mm | Basic (no mounting) | - · PT | $386.87 | |
| BSAID80X80S | 80 mm | Basic (no mounting) | S · PT | $392.45 | |
| BSAID80X100 | 100 mm | Basic (no mounting) | - · PT | $386.87 | |
| BSAID80X100S | 100 mm | Basic (no mounting) | S · PT | $392.45 | |
| BSAID80X125 | 125 mm | Basic (no mounting) | - · PT | $391.05 | |
| BSAID80X125S | 125 mm | Basic (no mounting) | S · PT | $396.63 | |
| BSAID80X150 | 150 mm | Basic (no mounting) | - · PT | $394.78 | |
| BSAID80X150S | 150 mm | Basic (no mounting) | S · PT | $400.36 | |
| BSAID80X160 | 160 mm | Basic (no mounting) | - · PT | $398.96 | |
| BSAID80X160S | 160 mm | Basic (no mounting) | S · PT | $404.54 | |
| BSAID80X175 | 175 mm | Basic (no mounting) | - · PT | $398.96 | |
| BSAID80X175S | 175 mm | Basic (no mounting) | S · PT | $404.54 | |
| BSAID80X200 | 200 mm | Basic (no mounting) | - · PT | $402.89 | |
| BSAID80X200S | 200 mm | Basic (no mounting) | S · PT | $408.47 | |
| BSAID80X225 | 225 mm | Basic (no mounting) | - · PT | $406.87 | |
| BSAID80X225S | 225 mm | Basic (no mounting) | S · PT | $412.45 | |
| BSAID80X250 | 250 mm | Basic (no mounting) | - · PT | $410.80 | |
| BSAID80X250S | 250 mm | Basic (no mounting) | S · PT | $416.38 | |
| BSAID80X300 | 300 mm | Basic (no mounting) | - · PT | $418.50 | |
| BSAID80X300S | 300 mm | Basic (no mounting) | S · PT | $424.09 | |
| BSAID80X350 | 350 mm | Basic (no mounting) | - · PT | $426.41 | |
| BSAID80X350S | 350 mm | Basic (no mounting) | S · PT | $432.00 | |
| BSAID80X400 | 400 mm | Basic (no mounting) | - · PT | $434.32 | |
| BSAID80X400S | 400 mm | Basic (no mounting) | S · PT | $439.91 | |
| BSAID80X450 | 450 mm | Basic (no mounting) | - · PT | $442.23 | |
| BSAID80X450S | 450 mm | Basic (no mounting) | S · PT | $447.81 | |
| BSAID80X500 | 500 mm | Basic (no mounting) | - · PT | $450.14 | |
| BSAID80X500S | 500 mm | Basic (no mounting) | S · PT | $455.72 | |
| BSAID80X600 | 600 mm | Basic (no mounting) | - · PT | $467.10 | |
| BSAID80X600S | 600 mm | Basic (no mounting) | S · PT | $472.68 | |
| BSAID80X700 | 700 mm | Basic (no mounting) | - · PT | $484.11 | |
| BSAID80X700S | 700 mm | Basic (no mounting) | S · PT | $489.69 | |
| BSAID80X800 | 800 mm | Basic (no mounting) | - · PT | $501.32 | |
| BSAID80X800S | 800 mm | Basic (no mounting) | S · PT | $506.91 | |
| BSAID80X900 | 900 mm | Basic (no mounting) | - · PT | $518.54 | |
| BSAID80X900S | 900 mm | Basic (no mounting) | S · PT | $524.12 | |
| BSAID80X1000 | 1000 mm | Basic (no mounting) | - · PT | $535.49 | |
| BSAID80X1000S | 1000 mm | Basic (no mounting) | S · PT | $541.08 |
Need a combination that is not listed? Request a quote.
Where the BSAID80 Is Used
Heavy pushing and lifting
About 2268 N at 0.5 MPa moves heavy slides, lifts gates and ejects parts.
Intermediate stops
Clamp the rod at any point of the stroke and hold it there while the machine works.
Holding when air is lost
The spring-applied clamp keeps the rod in place when the release port is exhausted.
Choosing the Right BSAID80 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Every code on this page is the basic version without a mounting code: the cylinder is fixed through its own mounting holes.
The clamping unit is the same on every code of this page (3600 N static holding force). Finally pick the version: S adds a magnet for position sensors.
AirTAC BSAID80 FAQ
The catalog static holding force for Ø80 mm is 3600 N. It is a static rating, so stop the rod before the clamp engages; the lock holds in both directions at any stroke position.
Supply 0.15 to 0.7 MPa to the clamp's G1/8 port; with the port exhausted the springs keep the rod clamped. A manual release is also provided.
No. Every BSAID80 gives about 2268 N in both directions at 0.5 MPa, whatever the stroke.
3/8" ports, PT thread as standard.
Every code on this page is the basic version without a mounting code; the cylinder is fixed through its own mounting holes.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 0.7 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single BSAID80. Orders are processed and handed to the carrier within 3-5 business days.
Buying the BSAID80 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-10.
Request a Quote for the BSAID80
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.