AirTAC 2L320 2/2-Way Steam Solenoid Valve, Normally Closed, 1 1/4" Port
Every stocked AirTAC 2L320 configuration on one page: 10 order codes covering 5 coil voltages, from $260.52. Pick the port, voltage and electrical entry to see the exact order code and price.
PT1 1/4
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC 2L320
The AirTAC 2L320 is a normally closed 2/2-way solenoid valve for saturated steam, hot water and oil, with 1 1/4" ports and a Ø35.0 mm orifice (Cv 23.00). It is internally piloted: the line pressure helps move the piston, which gives a large flow from a small coil, so it needs at least 0.05 MPa across the valve to switch. The valve is closed with the coil off and opens while the coil is energised.
The body is SUS304 stainless steel with PTFE seals, suited to hot water and saturated steam. It handles media up to 20 cSt, proof pressure 1.5 MPa. The coil is rated IP65 with class H insulation and comes with a DIN connector or a 0.5 m lead wire.
2L320 Technical Specifications
| Model | 2L320 |
|---|---|
| Function | 2/2-way, normally closed |
| Operation | Internally piloted |
| Port | PT1 1/4 |
| Orifice | Ø35.0 mm |
| Cv / effective area | 23.00 / 420.0 mm² |
| Body / seal | SUS304 stainless steel / PTFE |
| Weight | 2700 g (DIN connector; lead wire 20 g less) |
| Media | Saturated steam, hot water and oil |
|---|---|
| Viscosity | 20 cSt or less |
| Operating pressure difference | 0.05 – 1.0 MPa (10 – 150 psi) |
| Proof pressure | 1.5 MPa (220 psi) |
| Temperature | Oil -10 to +150 °C, hot water +1 to +150 °C, saturated steam up to 183 °C, ambient -20 to +100 °C |
| Coil | CDA170 / CLA170 |
| Coil power | AC 25.0 VA (50 Hz) / 22.0 VA (60 Hz) · DC 12.0 W |
| Voltage tolerance | AC ±15%, DC ±10% |
| Insulation / protection | Class H / IP65 |
Source: AirTAC catalog P207, 2L series specifications and ordering code.
How the 2L320 Order Code Is Built
| 2L | 2/2-way normally closed solenoid valve |
|---|---|
| 320 | Nominal bore Ø35 mm |
| 32 | Port: 32 = 1 1/4" |
| A / B / C / E / F | Voltage: A AC220V, B DC24V, C AC110V, E AC24V, F DC12V |
| I | Lead wire 0.5 m (blank = DIN connector) |
| G / T | Thread: G = G (BSPP), T = NPT, blank = PT |
All AirTAC 2L320 Order Codes (10)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Port | Voltage | Entry | Price | Select |
|---|---|---|---|---|---|
| 2L32032B | PT1 1/4 | DC24V (B) | DIN connector | $260.52 | |
| 2L32032BI | PT1 1/4 | DC24V (B) | Lead wire 0.5 m (I) | $260.52 | |
| 2L32032A | PT1 1/4 | AC220V (A) | DIN connector | $260.52 | |
| 2L32032AI | PT1 1/4 | AC220V (A) | Lead wire 0.5 m (I) | $260.52 | |
| 2L32032C | PT1 1/4 | AC110V (C) | DIN connector | $260.52 | |
| 2L32032CI | PT1 1/4 | AC110V (C) | Lead wire 0.5 m (I) | $260.52 | |
| 2L32032E | PT1 1/4 | AC24V (E) | DIN connector | $260.52 | |
| 2L32032EI | PT1 1/4 | AC24V (E) | Lead wire 0.5 m (I) | $260.52 | |
| 2L32032F | PT1 1/4 | DC12V (F) | DIN connector | $260.52 | |
| 2L32032FI | PT1 1/4 | DC12V (F) | Lead wire 0.5 m (I) | $260.52 |
Need a combination that is not listed? Request a quote.
Where the 2L320 Is Used
Steam lines
Switches saturated steam up to 183 °C for heating, sterilising and cleaning.
Hot water
Opens and closes hot water lines up to 150 °C.
Hot oil
Handles oil up to 150 °C and 20 cSt.
Choosing the Right 2L320 Configuration
The port is 1 1/4"; PT is standard.
Choose the coil voltage to match your control circuit: DC24V (B), AC220V (A), AC110V (C), AC24V (E), DC12V (F). Supply tolerance is AC ±15% and DC ±10%.
For the electrical entry, the standard DIN connector takes your own cable; the I version has a 0.5 m lead wire already attached.
The 2L is normally closed: the valve is closed with the coil off and opens while the coil is energised. For a normally open valve use the 2KL.
Pilot-operated sizes need at least 0.05 MPa pressure difference to switch; for lines that may run at zero pressure, use a direct-acting 2L030 or 2L050.
Sizes 320, 400 and 500 have no mounting bracket accessory.
AirTAC 2L320 FAQ
Normally closed. The valve is closed with the coil off and opens while the coil is energised.
Saturated steam, hot water and oil up to 20 cSt. Oil -10 to +150 °C, hot water +1 to +150 °C, saturated steam up to 183 °C, ambient -20 to +100 °C.
It works at a pressure difference of 0.05 – 1.0 MPa (10 – 150 psi); proof pressure 1.5 MPa. As a pilot-operated valve it needs at least 0.05 MPa to switch.
DC24V (B), AC220V (A), AC110V (C), AC24V (E), DC12V (F). The letter after the port size gives the voltage.
No. You can order a single piece. Orders are processed and handed to the carrier within 3-5 business days.
Buying the 2L320 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-11.
Request a Quote for the 2L320
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.