AirTAC MTD16 Single-Acting Pull Multi-Mount Cylinder, 16 mm Bore
Every AirTAC MTD16 configuration on one page: 8 stock order codes with strokes from 5 to 20 mm, from $23.95. Pick a stroke, port thread and version to see the exact order code and price.
M5×0.8 ports
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC MTD16
The AirTAC MTD16 is a single-acting, spring-return multi-mount cylinder (pull type) with a 16 mm bore and a 6 mm piston rod. Compressed air retracts the rod and a built-in spring extends it when the air is released, so the rod rests extended; only one port takes air. Catalog output with the spring force already deducted is 60.5 N pull at 0.5 MPa and 95.1 N at 0.7 MPa. The spring stroke has no air behind it, so it must not carry a load.
The compact square body can be fixed from several faces and several cylinders can be mounted side by side. The rod guide needs no added lubrication. All MTD16 versions use M5×0.8 air ports and run on filtered air at 0.2 to 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 50 to 500 mm/s. This page lists 8 stock order codes with strokes from 5 to 20 mm; the catalog maximum stroke is 20 mm.
MTD16 Technical Specifications
| Bore size | Ø16 mm |
|---|---|
| Piston rod | Ø6 mm |
| Stock strokes | 5 – 20 mm |
| Catalog maximum stroke | 20 mm |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Rubber bumpers at both ends |
| Acting type | Single acting, spring return (pull) |
Source: AirTAC Products Catalog 2026A (PDF01-P0502/P0503), MD (MTD) series ordering code and specifications.
Catalog output force (Ø16 mm)
| Pressure | Pull (spring deducted) |
|---|---|
| 0.5 MPa | 60.5 N |
| 0.7 MPa | 95.1 N |
AirTAC catalog values for the single-acting pull type: air force on the bore minus the Ø6 mm rod less the return-spring force. The spring stroke delivers no rated force.
How the MTD16 Order Code Is Built
| MTD16 | Series and bore (16 mm) |
|---|---|
| X50 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
All AirTAC MTD16 Order Codes (8)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Port thread | Magnet | Price | Select |
|---|---|---|---|---|---|
| MTD16X5S | 5 mm | M5×0.8 ports | Magnet (S) | $28.60 | |
| MTD16X5 | 5 mm | M5×0.8 ports | No magnet | $23.95 | |
| MTD16X10S | 10 mm | M5×0.8 ports | Magnet (S) | $29.53 | |
| MTD16X10 | 10 mm | M5×0.8 ports | No magnet | $25.08 | |
| MTD16X15S | 15 mm | M5×0.8 ports | Magnet (S) | $30.67 | |
| MTD16X15 | 15 mm | M5×0.8 ports | No magnet | $26.02 | |
| MTD16X20S | 20 mm | M5×0.8 ports | Magnet (S) | $32.07 | |
| MTD16X20 | 20 mm | M5×0.8 ports | No magnet | $27.41 |
Need a combination that is not listed? Request a quote.
Where the MTD16 Is Used
Small pushers and stoppers
About 60.5 N at 0.5 MPa in a body that fixes from several faces.
Multi-cylinder banks
Several cylinders mount side by side to save space.
Sensed positioning
Magnet versions report stroke ends through cylinder sensors.
Choosing the Right MTD16 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Finally pick the version: S adds a magnet for position sensors.
AirTAC MTD16 FAQ
Air retracts the rod with about 60.5 N at 0.5 MPa (catalog value, spring force deducted); the internal spring extends it when the port is vented. The force does not depend on the stroke code.
No. The return stroke is driven only by the internal spring, and AirTAC specifies that single-acting cylinders must not be loaded on it. Use a double-acting model if both directions must do work.
M5×0.8 ports.
0.2 to 1.0 MPa operating pressure (proof 1.5 MPa), 50 to 500 mm/s and -20 to +70 °C on filtered air.
Usually yes. Request a quote with the stroke and version and we will confirm whether it can be built, plus price and lead time.
No. You can order a single MTD16. Orders are processed and handed to the carrier within 3-5 business days.
Buying the MTD16 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-09.
Request a Quote for the MTD16
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.