AirTAC BSC100 Rod-Lock Tie-Rod Cylinder, 100 mm Bore

The AirTAC BSC100 is a double-acting rod-lock tie-rod cylinder with a 100 mm bore and a 25 mm piston rod. At 0.5 MPa it pushes 3927 N and pulls 3682 N; at 0.7 MPa that rises to 5498 N push and 5154 N pull. Force depends on bore and pressure only, so every stroke on this page gives the same output.

All BSC100 versions share 1/2" air ports, an M20×1.5 rod thread and 29 mm adjustable air cushions. The cylinder runs on filtered air between 0.15 and 0.7 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 800 mm/s. This page lists 45 stock order codes with strokes from 25 to 1000 mm; catalog standard strokes run up to 1000 mm.

The BSC100 is the SC tie-rod cylinder with a compact clamping unit built in. Springs apply clamp plates to the piston rod and air releases them, so the rod can be locked at any point of the stroke, in either direction and whether it is extended or retracted. Static holding force at this bore is 5500 N. The clamp has its own G1/8 port and releases at 0.15 to 0.7 MPa; it can also be released by hand. The holding force is a static rating: stop the rod first, then clamp it.