Airtac BSAID Clamp Cylinder BSAID80X175
The AirTAC Airtac BSAID Clamp Cylinder BSAID80X175 is a genuine double-acting ISO 15552 cylinder with a Ø80mm bore, 175mm stroke and a spring-applied, air-released clamp-lock that holds the rod at ANY position along its travel — with a static holding force of 3600 N.
- BoreØ80 mm
- Stroke175 mm
- Cylinder portG3/8
- TypeDouble rod (BSAID)
- Enclasp portG1/8
- Rod threadM20×1.5
About the Airtac BSAID Clamp Cylinder BSAID80X175
The AirTAC BSAID80X175 is a double-acting ISO 15552 profile cylinder featuring a rod out both ends and a built-in clamp-lock mechanism. A spring-applied, air-released gripper secures the piston rod at any position along its 175mm travel, delivering a static holding force of 3600 N. Because it is a double-rod design, the thrust is identical in both directions, providing 2268 N of pull at 0.5 MPa on either side. Remember that the holding force is a separate quantity from the cylinder thrust; you must size the 3600 N clamp against your static load, not the 2268 N thrust.
The dual-rod architecture lets you mount a workpiece on one end and a guide, counterweight, or position flag on the opposite end for dual-side anti-rotation. This cylinder uses a 25 mm rod with an M20x1.5 thread, which handles side loads well, but external guidance is still recommended for rigid structures. The clamp relies on a third G1/8 enclasp port to release the rod, requiring balanced air pressure between 0.15-0.7 MPa to prevent abrupt movement upon unlocking. Note that the variable air cushion only decelerates the piston near stroke ends; the mechanical clamp is what actually holds the load.
Airtac BSAID Clamp Cylinder BSAID80X175 Technical Specifications
| Model | Airtac BSAID Clamp Cylinder BSAID80X175 |
|---|---|
| Series | BSAI ISO 15552 clamp-lock cylinder |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Type | Double rod (BSAID), double acting |
| Cylinder port | G3/8 |
| Rod thread | M20×1.5 |
| Lock type | Spring-applied, air-released clamp (any position) |
|---|---|
| Static holding force | 3600 N |
| Enclasp / unlock port | G1/8 |
| Operating pressure | 0.15 – 0.7 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC BSAI datasheet (ISO 15552). Operating pressure is 0.15–0.7 MPa (lower than a plain SAI). Port options: PT / G.
How the Clamp-Lock Holds
static holding force (Ø80 mm)
A spring-applied gripper clamps the rod and holds the load at any position in the stroke — not just at the stroke end (that is a SAIL) — and it is bidirectional: it holds whether the rod was extending or retracting.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa (max) | 3519 N | — |
Equal force both directions (double rod). Rated to the 0.7 MPa operating maximum for this series. The clamp holding force (3600 N) is separate from cylinder thrust. Size with a margin.
Where the Airtac BSAID Clamp Cylinder BSAID80X175 Is Used
Vertical Axis Hold
Prevents gravity-driven drops on vertical lifts by clamping the 25mm rod securely at any point in the 175mm stroke.
Power Loss Safety
Spring-applied enclasp engages automatically during an air pressure failure, freezing the load mid-travel with 3600 N of force.
Machining Position Lock
Holds a dual-side workpiece rigidly for machining or inspection, using the second rod for a position flag or counterweight.
Is the Airtac BSAID Clamp Cylinder BSAID80X175 the Right Clamp-Lock?
Choose this 80mm bore when you need robust mid-stroke holding that a standard SAI or SAID cannot provide, and when a stroke-end-only lock like the SAIL is insufficient. If your application requires less force, the 63mm bore offers 1402 N thrust and a 2200 N holding force; if you need more, the 100mm bore provides 3681 N thrust and 5500 N holding force. The BSAID80X175 operates at 30-800 mm/s and uses PT-threaded ports (3/8 cylinder port, G1/8 enclasp port). Mounting options for this double-rod version include Basic, FA, LB, TC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets used on single-rod BSAI models. As this model lacks a magnet (-S not specified), it will not work with CMSE or DMSE sensors without modification.
For safe operation, understand that the clamp locks only after the rod has completely stopped; it cannot brake a moving load. You must unlock the clamp only when cylinder pressures are balanced, or the rod may jump unexpectedly. If human safety depends on the hold, add an independent safety measure.
Quick checklist
- ✓ Hold needed at any position?
- ✓ Or stroke-end only → use SAIL
- ✓ Holding force ≥ your load
- ✓ Balanced-pressure unlock circuit
- ✓ Extra safety measure for people
Airtac BSAID Clamp Cylinder BSAID80X175 FAQ
The clamp provides a static holding force of 3600 N, which is separate from the cylinder's 2268 N thrust (equal both ways at 0.5 MPa). You must size the 3600 N clamp against your static load, not the thrust.
No. The clamp locks only after the cylinder has stopped; it cannot brake a moving rod. It must be unlocked with balanced air pressures to prevent the rod from jumping, and safety-critical loads require an independent safety measure.
Related AirTAC Lock & Standard Cylinders
Request a Quote for Airtac BSAID Clamp Cylinder BSAID80X175
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.