AirTAC SID32 Double-Rod ISO Cylinder, 32 mm Bore
Every AirTAC SID32 configuration on one page: 37 stock order codes with strokes from 25 to 600 mm, 2 mounting styles and magnet and seal versions, from $55.59. Pick a stroke, mounting and version to see the exact order code and price. Discontinued series: orders ship as the SAID with the same code.
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC SID32
Discontinued: AirTAC has replaced the SID series with the SAID series. Every SID code on this page is supplied as the current SAID with the same code after the prefix, for example SID32X25 ships as SAID32X25. The specifications on this page are those of the SAID you receive.
The AirTAC SID32 is a double-rod, double-acting ISO 15552 profile-barrel cylinder with a 32 mm bore and a 12 mm piston rod. The rod runs through both end covers, so push and pull are equal: 346 N at 0.5 MPa and 484 N at 0.7 MPa. Force depends on bore and pressure only, so every stroke on this page gives the same output.
All SID32 versions share 1/8" air ports, an M10×1.25 rod thread and 27 mm adjustable air cushions. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 800 mm/s. This page lists 37 stock order codes with strokes from 25 to 600 mm; catalog standard strokes run up to 500 mm, and the longer codes are non-standard strokes that we confirm with the quote.
SID32 Technical Specifications
| Bore size | Ø32 mm |
|---|---|
| Stock strokes | 25 – 600 mm |
| Catalog standard stroke | up to 500 mm (longer on request) |
| Acting type | Double acting, double rod |
| Port size | 1/8" (PT standard) |
| Piston rod / rod thread | Ø12 mm / M10×1.25 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Source: AirTAC Products Catalog 2026A, SAI series (SAID double-rod version) (ISO 15552). Standard seal is TPU/NBR per bore. The SID series is discontinued; these are the SAID specifications.
Theoretical output force (Ø32 mm)
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
Both directions act on the bore area minus the Ø12 mm rod area, because the rod passes through both end covers. Usable force is lower because of friction and back-pressure.
How the SID32 Order Code Is Built
| SID32 | Series and bore (32 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| LB / TC | Mounting: LB foot, TC center trunnion |
| H / N | Seal: H = FKM, N = NBR (blank = standard seal) |
| G | Port thread: G = G (BSPP), blank = PT |
All AirTAC SID32 Order Codes (37)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Rod material · Seal · Thread | Price | Select |
|---|---|---|---|---|---|
| SID32X25 | 25 mm | Basic (no mounting) | - · std seal · PT | $55.59 | |
| SID32X25S | 25 mm | Basic (no mounting) | S · std seal · PT | $58.38 | |
| SID32X40S | 40 mm | Basic (no mounting) | S · std seal · PT | $59.52 | |
| SID32X50 | 50 mm | Basic (no mounting) | - · std seal · PT | $56.73 | |
| SID32X50H | 50 mm | Basic (no mounting) | - · FKM · PT | $66.50 | |
| SID32X50S | 50 mm | Basic (no mounting) | S · std seal · PT | $59.52 | |
| SID32X50LB | 50 mm | LB foot | - · std seal · PT | $59.98 | |
| SID32X75 | 75 mm | Basic (no mounting) | - · std seal · PT | $58.84 | |
| SID32X75S | 75 mm | Basic (no mounting) | S · std seal · PT | $61.63 | |
| SID32X80 | 80 mm | Basic (no mounting) | - · std seal · PT | $60.91 | |
| SID32X80S | 80 mm | Basic (no mounting) | S · std seal · PT | $63.70 | |
| SID32X100 | 100 mm | Basic (no mounting) | - · std seal · PT | $60.91 | |
| SID32X100S | 100 mm | Basic (no mounting) | S · std seal · PT | $63.70 | |
| SID32X125 | 125 mm | Basic (no mounting) | - · std seal · PT | $63.03 | |
| SID32X125S | 125 mm | Basic (no mounting) | S · std seal · PT | $65.83 | |
| SID32X150 | 150 mm | Basic (no mounting) | - · std seal · PT | $64.89 | |
| SID32X150S | 150 mm | Basic (no mounting) | S · std seal · PT | $67.69 | |
| SID32X160 | 160 mm | Basic (no mounting) | - · std seal · PT | $66.96 | |
| SID32X175 | 175 mm | Basic (no mounting) | - · std seal · PT | $66.96 | |
| SID32X175S | 175 mm | Basic (no mounting) | S · std seal · PT | $69.76 | |
| SID32X200 | 200 mm | Basic (no mounting) | - · std seal · PT | $68.82 | |
| SID32X200S | 200 mm | Basic (no mounting) | S · std seal · PT | $71.61 | |
| SID32X250 | 250 mm | Basic (no mounting) | - · std seal · PT | $72.80 | |
| SID32X250S | 250 mm | Basic (no mounting) | S · std seal · PT | $75.59 | |
| SID32X300 | 300 mm | Basic (no mounting) | - · std seal · PT | $76.73 | |
| SID32X300S | 300 mm | Basic (no mounting) | S · std seal · PT | $79.52 | |
| SID32X350 | 350 mm | Basic (no mounting) | - · std seal · PT | $80.92 | |
| SID32X350S | 350 mm | Basic (no mounting) | S · std seal · PT | $83.71 | |
| SID32X350STC | 350 mm | TC center trunnion | S · std seal · PT | $106.98 | |
| SID32X400 | 400 mm | Basic (no mounting) | - · std seal · PT | $84.90 | |
| SID32X400S | 400 mm | Basic (no mounting) | S · std seal · PT | $87.69 | |
| SID32X450 | 450 mm | Basic (no mounting) | - · std seal · PT | $88.83 | |
| SID32X450S | 450 mm | Basic (no mounting) | S · std seal · PT | $91.62 | |
| SID32X500 | 500 mm | Basic (no mounting) | - · std seal · PT | $92.81 | |
| SID32X500S | 500 mm | Basic (no mounting) | S · std seal · PT | $95.60 | |
| SID32X600 | 600 mm | Basic (no mounting) | - · std seal · PT | $101.86 | |
| SID32X600S | 600 mm | Basic (no mounting) | S · std seal · PT | $104.65 |
Need a combination that is not listed? Request a quote.
Where the SID32 Is Used
Pick-and-place and transfer
About 346 N at 0.5 MPa suits pushers, stoppers and transfer slides.
Packaging machines
Carton pushers, gates and diverters on packaging lines.
Sensed positioning
Magnet versions report stroke ends to the PLC through cylinder sensors.
Choosing the Right SID32 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the mounting. Basic (no code) uses the cylinder's own mounting holes. This bore is stocked with LB foot, TC center trunnion. Foot and flange mountings hold the cylinder rigid for straight-line loads; clevis and trunnion mountings let it pivot when the load moves in an arc.
Finally pick the version: S adds a magnet for position sensors; the standard seal suits general automation; H (FKM) is for higher temperatures or oil-contaminated air.
AirTAC SID32 FAQ
Discontinued: AirTAC has replaced the SID series with the SAID series. Every SID code on this page is supplied as the current SAID with the same code after the prefix, for example SID32X25 ships as SAID32X25. The specifications on this page are those of the SAID you receive.
No. Every SID32 gives about 346 N in both directions at 0.5 MPa, whatever the stroke.
1/8" ports, PT thread as standard.
Basic plus LB foot, TC center trunnion. Use foot or flange for straight-line loads, clevis or trunnion when the cylinder must pivot.
The standard rod is medium carbon steel. The ordering code also allows A (SUS420J2) and B (SUS304) stainless rods; request a quote for those versions.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single SID32. Orders are processed and handed to the carrier within 3-5 business days.
Buying the SID32 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-11.
Request a Quote for the SID32
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.