AirTAC SID160 Double-Rod ISO Cylinder, 160 mm Bore
Every AirTAC SID160 configuration on one page: 46 stock order codes with strokes from 25 to 1000 mm, magnet and seal versions, from $336.36. Pick a stroke and version to see the exact order code and price. Discontinued series: orders ship as the SAID with the same code.
Basic (no mounting)
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC SID160
Discontinued: AirTAC has replaced the SID series with the SAID series. Every SID code on this page is supplied as the current SAID with the same code after the prefix, for example SID160X25 ships as SAID160X25. The specifications on this page are those of the SAID you receive.
The AirTAC SID160 is a double-rod, double-acting ISO 15552 profile-barrel cylinder with a 160 mm bore and a 40 mm piston rod. The rod runs through both end covers, so push and pull are equal: 9425 N at 0.5 MPa and 13195 N at 0.7 MPa. Force depends on bore and pressure only, so every stroke on this page gives the same output.
All SID160 versions share 3/4" air ports, an M36×2 rod thread and 50 mm adjustable air cushions. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 500 mm/s. This page lists 46 stock order codes with strokes from 25 to 1000 mm; catalog standard strokes run up to 1000 mm.
SID160 Technical Specifications
| Bore size | Ø160 mm |
|---|---|
| Stock strokes | 25 – 1000 mm |
| Catalog standard stroke | up to 1000 mm (longer on request) |
| Acting type | Double acting, double rod |
| Port size | 3/4" (PT standard) |
| Piston rod / rod thread | Ø40 mm / M36×2 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
Source: AirTAC Products Catalog 2026A, SAI series (SAID double-rod version) (ISO 15552). Standard seal is TPU/NBR per bore. The SID series is discontinued; these are the SAID specifications.
Theoretical output force (Ø160 mm)
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | 13195 N |
Both directions act on the bore area minus the Ø40 mm rod area, because the rod passes through both end covers. Usable force is lower because of friction and back-pressure.
How the SID160 Order Code Is Built
| SID160 | Series and bore (160 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| - | Mounting: basic only |
| H / N | Seal: H = FKM, N = NBR (blank = standard seal) |
| G | Port thread: G = G (BSPP), blank = PT |
All AirTAC SID160 Order Codes (46)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Rod material · Seal · Thread | Price | Select |
|---|---|---|---|---|---|
| SID160X25 | 25 mm | Basic (no mounting) | - · std seal · PT | $336.36 | |
| SID160X25S | 25 mm | Basic (no mounting) | S · std seal · PT | $343.80 | |
| SID160X40S | 40 mm | Basic (no mounting) | S · std seal · PT | $353.57 | |
| SID160X50 | 50 mm | Basic (no mounting) | - · std seal · PT | $346.13 | |
| SID160X50S | 50 mm | Basic (no mounting) | S · std seal · PT | $353.57 | |
| SID160X60 | 60 mm | Basic (no mounting) | - · std seal · PT | $357.29 | |
| SID160X75 | 75 mm | Basic (no mounting) | - · std seal · PT | $357.29 | |
| SID160X75S | 75 mm | Basic (no mounting) | S · std seal · PT | $364.74 | |
| SID160X80 | 80 mm | Basic (no mounting) | - · std seal · PT | $368.26 | |
| SID160X80S | 80 mm | Basic (no mounting) | S · std seal · PT | $375.70 | |
| SID160X100 | 100 mm | Basic (no mounting) | - · std seal · PT | $368.26 | |
| SID160X100S | 100 mm | Basic (no mounting) | S · std seal · PT | $375.70 | |
| SID160X125 | 125 mm | Basic (no mounting) | - · std seal · PT | $380.56 | |
| SID160X125S | 125 mm | Basic (no mounting) | S · std seal · PT | $388.00 | |
| SID160X150 | 150 mm | Basic (no mounting) | - · std seal · PT | $392.91 | |
| SID160X150S | 150 mm | Basic (no mounting) | S · std seal · PT | $400.36 | |
| SID160X160 | 160 mm | Basic (no mounting) | - · std seal · PT | $405.22 | |
| SID160X160S | 160 mm | Basic (no mounting) | S · std seal · PT | $412.66 | |
| SID160X175 | 175 mm | Basic (no mounting) | - · std seal · PT | $405.22 | |
| SID160X200 | 200 mm | Basic (no mounting) | - · std seal · PT | $416.38 | |
| SID160X200S | 200 mm | Basic (no mounting) | S · std seal · PT | $423.83 | |
| SID160X220 | 220 mm | Basic (no mounting) | - · std seal · PT | $428.48 | |
| SID160X250 | 250 mm | Basic (no mounting) | - · std seal · PT | $440.84 | |
| SID160X250S | 250 mm | Basic (no mounting) | S · std seal · PT | $448.28 | |
| SID160X300 | 300 mm | Basic (no mounting) | - · std seal · PT | $462.91 | |
| SID160X300H | 300 mm | Basic (no mounting) | - · FKM · PT | $530.38 | |
| SID160X300S | 300 mm | Basic (no mounting) | S · std seal · PT | $470.36 | |
| SID160X300SH | 300 mm | Basic (no mounting) | S · FKM · PT | $537.82 | |
| SID160X350 | 350 mm | Basic (no mounting) | - · std seal · PT | $487.57 | |
| SID160X350S | 350 mm | Basic (no mounting) | S · std seal · PT | $495.02 | |
| SID160X400 | 400 mm | Basic (no mounting) | - · std seal · PT | $510.84 | |
| SID160X400S | 400 mm | Basic (no mounting) | S · std seal · PT | $518.28 | |
| SID160X450 | 450 mm | Basic (no mounting) | - · std seal · PT | $535.49 | |
| SID160X450S | 450 mm | Basic (no mounting) | S · std seal · PT | $542.94 | |
| SID160X500 | 500 mm | Basic (no mounting) | - · std seal · PT | $558.76 | |
| SID160X500S | 500 mm | Basic (no mounting) | S · std seal · PT | $566.20 | |
| SID160X600 | 600 mm | Basic (no mounting) | - · std seal · PT | $609.27 | |
| SID160X600S | 600 mm | Basic (no mounting) | S · std seal · PT | $616.71 | |
| SID160X700 | 700 mm | Basic (no mounting) | - · std seal · PT | $659.52 | |
| SID160X700S | 700 mm | Basic (no mounting) | S · std seal · PT | $666.96 | |
| SID160X800 | 800 mm | Basic (no mounting) | - · std seal · PT | $709.77 | |
| SID160X800S | 800 mm | Basic (no mounting) | S · std seal · PT | $717.21 | |
| SID160X900 | 900 mm | Basic (no mounting) | - · std seal · PT | $760.22 | |
| SID160X900S | 900 mm | Basic (no mounting) | S · std seal · PT | $767.67 | |
| SID160X1000 | 1000 mm | Basic (no mounting) | - · std seal · PT | $810.47 | |
| SID160X1000S | 1000 mm | Basic (no mounting) | S · std seal · PT | $817.92 |
Need a combination that is not listed? Request a quote.
Where the SID160 Is Used
High-force actuation
Over 9.4 kN at 0.5 MPa for presses, lifting tables and dampers.
Process and material handling
Opens chutes, gates and dampers on bulk-handling equipment.
Pivoting heavy loads
Clevis and trunnion versions swing large doors and platforms.
Choosing the Right SID160 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Every code on this page is the basic version without a mounting code: the cylinder is fixed through its own mounting holes.
Finally pick the version: S adds a magnet for position sensors; the standard seal suits general automation; H (FKM) is for higher temperatures or oil-contaminated air.
AirTAC SID160 FAQ
Discontinued: AirTAC has replaced the SID series with the SAID series. Every SID code on this page is supplied as the current SAID with the same code after the prefix, for example SID160X25 ships as SAID160X25. The specifications on this page are those of the SAID you receive.
No. Every SID160 gives about 9425 N in both directions at 0.5 MPa, whatever the stroke.
3/4" ports, PT thread as standard.
Every code on this page is the basic version without a mounting code; the cylinder is fixed through its own mounting holes.
The standard rod is medium carbon steel. The ordering code also allows A (SUS420J2) and B (SUS304) stainless rods; request a quote for those versions.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single SID160. Orders are processed and handed to the carrier within 3-5 business days.
Buying the SID160 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-11.
Request a Quote for the SID160
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.