Every AirTAC TR25 configuration on one page: 5 order codes with strokes from 10 to 80 mm, from $70.88. Pick a stroke, port thread and version to see the exact order code and price.
PT ports
Magnet (S)
This combination is not a stock order code. Request a quote and we will confirm availability and price.
The AirTAC TR25 is a double-acting twin-rod cylinder built to JIS dimensions (two pistons working in parallel) with a 25 mm bore. At 0.5 MPa it pushes 490.9 N and pulls 377.8 N; at 0.7 MPa, 687.2 N push and 528.9 N pull. Force depends on bore and pressure only, so every stroke on this page gives the same output.
Two parallel pistons double the output, and long sliding-bearing guides keep the plate square with high non-rotating accuracy and little rod deflection, without lubrication. It resists side load and twisting, the plate has mounting holes on three faces, the body has its own mounting holes, and the ports can be used on either side. Bumpers cushion both ends, and the extend stroke can be trimmed by up to 5 mm. All TR25 versions use 1/8" air ports and run on filtered air at 0.15 to 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 500 mm/s. This page lists 5 order codes with strokes from 10 to 80 mm; the catalog maximum stroke is 200 mm.
| Bore size | Ø25 mm |
|---|---|
| Piston rod | Ø12 mm × 2 |
| Listed strokes | 10 – 80 mm |
| Catalog maximum stroke | 200 mm |
| Port size | 1/8" (PT standard) |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Rubber bumpers at both ends |
| Stroke adjustment | −5 to 0 mm (front bumper) |
| Non-rotating accuracy | ±0.2° (Ø6, Ø10) · ±0.15° (Ø16, Ø20) · ±0.1° (Ø25, Ø32) |
| Stroke tolerance | +1.0/0 mm up to 100 mm, +1.5/0 mm above |
Source: AirTAC Products Catalog 2026A (PDF01-P0519/P0520), TR series ordering code and specifications.
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 490.9 N | 377.8 N |
| 0.7 MPa | 687.2 N | 528.9 N |
Twin pistons: push = 2 × pressure × bore area; pull subtracts both rod areas. Usable force is lower because of friction and back-pressure.
| TR25 | Series and bore (25 mm) |
|---|---|
| X50 | Stroke in mm |
| S | Built-in magnet for position sensors (every code) |
| G / T | Port thread: G = G (BSPP), T = NPT, blank = PT |
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Port thread | Magnet | Price | Select |
|---|---|---|---|---|---|
| TR25X10S | 10 mm | PT ports | Magnet (S) | $70.88 | |
| TR25X20S | 20 mm | PT ports | Magnet (S) | $74.76 | |
| TR25X30S | 30 mm | PT ports | Magnet (S) | $78.60 | |
| TR25X40S | 40 mm | PT ports | Magnet (S) | $130.84 | |
| TR25X80S | 80 mm | PT ports | Magnet (S) | $161.30 |
Need a combination that is not listed? Request a quote.
Twin pistons give about 490.9 N at 0.5 MPa with a plate that does not turn.
The non-rotating plate holds jaws and clamp pads square.
Tooling bolts to the plate on three faces.
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Finally pick the version: every code carries a magnet for position sensors.
No. Every TR25 gives about 490.9 N push and 377.8 N pull at 0.5 MPa, whatever the stroke.
1/8" ports, PT thread as standard.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa), 30 to 500 mm/s and -20 to +70 °C on filtered air.
Usually yes. Request a quote with the stroke and version and we will confirm whether it can be built, plus price and lead time.
No. You can order a single TR25. Orders are processed and handed to the carrier within 3-5 business days.
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-12.
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.