AirTAC ASP32 Single-Acting Push Compact Cylinder, 32 mm Bore
Every AirTAC ASP32 configuration on one page: 21 order codes with strokes from 5 to 25 mm and 2 mountings, from $36.47. Pick a stroke, mounting and version to see the exact order code and price. Discontinued series: orders ship as the ASE with the same code.
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC ASP32
Discontinued: AirTAC has replaced the ASP series with the ASE series. Every ASP code on this page is supplied as the current ASE with the same code after the prefix, for example ASP32X5 ships as ASE32X5. The specifications on this page are those of the ASE you receive.
The AirTAC ASP32 is a single-acting, spring-return compact cylinder (push type) with a 32 mm bore and a 12 mm piston rod. Compressed air extends the rod and a built-in spring retracts it when the air is released, so the rod rests retracted; only one port takes air. Catalog output with the spring force already deducted is 352.5 N push at 0.5 MPa and 513.4 N at 0.7 MPa. The spring stroke has no air behind it, so it must not carry a load.
All ASP32 versions share 1/8" air ports, an M8×1.25 rod thread and rubber bumpers at both ends. The cylinder runs on filtered air between 0.2 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 50 to 500 mm/s. This page lists 21 order codes with strokes from 5 to 25 mm; the catalog maximum stroke is 25 mm.
ASP32 Technical Specifications
| Bore size | Ø32 mm |
|---|---|
| Stock strokes | 5 – 25 mm |
| Catalog maximum stroke | 25 mm (longer on request) |
| Acting type | Single acting, spring return (push) |
| Port size | 1/8" (PT standard) |
| Piston rod / rod thread | Ø12 mm / M8×1.25; male option (B) |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Rubber bumper at both ends |
Source: AirTAC Products Catalog 2026A (PDF01-P0469), ACE series (ASE) ordering code and specifications. The ASP series is discontinued; these are the ASE specifications.
Catalog output force (Ø32 mm)
| Pressure | Push (spring deducted) |
|---|---|
| 0.5 MPa | 352.5 N |
| 0.7 MPa | 513.4 N |
AirTAC catalog values for the single-acting push type: air force on the full bore less the return-spring force. The spring stroke delivers no rated force.
How the ASP32 Order Code Is Built
| ASP32 | Series and bore (32 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| B | Male threaded rod end (blank = female) |
| LB / FA / FB / CA / CB / CR / FTC / SDB | Mounting: LB foot; FA front flange; FB rear flange; CA single clevis; CB double clevis; CR rear pin clevis; FTC front trunnion; SDB pivot bracket (blank = none) |
| G | Port thread: G = G (BSPP), blank = PT |
All AirTAC ASP32 Order Codes (21)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Rod end · Thread | Price | Select |
|---|---|---|---|---|---|
| ASP32X5 | 5 mm | Basic (no mounting) | - · female rod · PT | $36.47 | |
| ASP32X5B | 5 mm | Basic (no mounting) | - · male rod (B) · PT | $36.47 | |
| ASP32X5S | 5 mm | Basic (no mounting) | S · female rod · PT | $38.21 | |
| ASP32X5SB | 5 mm | Basic (no mounting) | S · male rod (B) · PT | $38.21 | |
| ASP32X10 | 10 mm | Basic (no mounting) | - · female rod · PT | $37.53 | |
| ASP32X10B | 10 mm | Basic (no mounting) | - · male rod (B) · PT | $37.53 | |
| ASP32X10S | 10 mm | Basic (no mounting) | S · female rod · PT | $39.28 | |
| ASP32X10SB | 10 mm | Basic (no mounting) | S · male rod (B) · PT | $39.28 | |
| ASP32X15 | 15 mm | Basic (no mounting) | - · female rod · PT | $38.84 | |
| ASP32X15B | 15 mm | Basic (no mounting) | - · male rod (B) · PT | $38.84 | |
| ASP32X15S | 15 mm | Basic (no mounting) | S · female rod · PT | $40.58 | |
| ASP32X15SB | 15 mm | Basic (no mounting) | S · male rod (B) · PT | $40.58 | |
| ASP32X20 | 20 mm | Basic (no mounting) | - · female rod · PT | $40.15 | |
| ASP32X20B | 20 mm | Basic (no mounting) | - · male rod (B) · PT | $40.15 | |
| ASP32X20S | 20 mm | Basic (no mounting) | S · female rod · PT | $41.89 | |
| ASP32X20SB | 20 mm | Basic (no mounting) | S · male rod (B) · PT | $41.89 | |
| ASP32X25 | 25 mm | Basic (no mounting) | - · female rod · PT | $41.26 | |
| ASP32X25B | 25 mm | Basic (no mounting) | - · male rod (B) · PT | $41.26 | |
| ASP32X25S | 25 mm | Basic (no mounting) | S · female rod · PT | $43.00 | |
| ASP32X25SB | 25 mm | Basic (no mounting) | S · male rod (B) · PT | $43.00 | |
| ASP32X25LB | 25 mm | LB foot | - · female rod · PT | $45.19 |
Need a combination that is not listed? Request a quote.
Where the ASP32 Is Used
General automation
About 352.5 N at 0.5 MPa covers most pushing, lifting and indexing tasks.
Clamping fixtures
Rigid mountings hold the cylinder for clamps and presses.
Doors, gates and levers
Pivoting covers and brackets drive mechanisms that swing.
Choosing the Right ASP32 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the mounting. Basic (no code) uses the cylinder's own mounting holes. This bore is listed with LB foot. Foot and flange mountings hold the cylinder rigid for straight-line loads; clevis and trunnion mountings let it pivot when the load moves in an arc.
Finally pick the version: S adds a magnet for position sensors; B gives a male threaded rod end instead of the standard female thread.
AirTAC ASP32 FAQ
Discontinued: AirTAC has replaced the ASP series with the ASE series. Every ASP code on this page is supplied as the current ASE with the same code after the prefix, for example ASP32X5 ships as ASE32X5. The specifications on this page are those of the ASE you receive.
Air extends the rod with about 352.5 N at 0.5 MPa (catalog value, spring force deducted); the internal spring retracts it when the port is vented. The force does not depend on the stroke code.
No. The return stroke is driven only by the internal spring, and AirTAC specifies that single-acting cylinders must not be loaded on it. Use a double-acting model if both directions must do work.
1/8" ports, PT thread as standard.
Brackets: LB foot. Pick a pivoting cover or bracket when the load moves in an arc, a rigid one for straight-line loads.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.2 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single ASP32. Orders are processed and handed to the carrier within 3-5 business days.
Buying the ASP32 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-12.
Request a Quote for the ASP32
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.