This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ASE32X20SB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ASE32X20SB in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ASP Single Acting Guided Compact Cylinder ASP32X20SB
The AirTAC Airtac ASP Single Acting Guided Compact Cylinder ASP32X20SB is a single acting, push (spring return) DIN-standard tight/compact air cylinder with a Ø32mm bore and 20mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ASE32X20SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke20 mm
- Port size1/8"
- Acting typeSingle acting, push (spring return)
- Rod threadM8×1.25
- StatusDiscontinued → ASE32X20SB
About the Airtac ASP Single Acting Guided Compact Cylinder ASP32X20SB
A single acting push cylinder with spring return, the discontinued ASP32X20SB extends its 12 mm rod on air and retracts on the spring, needing only one air line and a minimum of 0.2 MPa to overcome the spring. This 32 mm bore unit delivers 352.5 N of push at 0.5 MPa (513.4 N at 0.7 MPa), already net of the return spring. The S code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted for end-of-stroke signalling. The B code gives a male rod thread and the port thread is PT.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight jigs and guarded stations. In practice, plan on about 211 N (roughly 21 kg of thrust) of usable work at 0.5 MPa rather than the full rating, and expect the spring to drive the rod home on air loss rather than hold a mid-stroke position. Note this model is discontinued: the current-production drop-in is ASE32X20, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ASP Single Acting Guided Compact Cylinder ASP32X20SB Technical Specifications
| Model | Airtac ASP Single Acting Guided Compact Cylinder ASP32X20SB |
|---|---|
| Series | ASP DIN compact cylinder (discontinued) |
| Replacement | ASE32X20SB |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Single acting, push (spring return) |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ASE32X20SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force (spring return) |
|---|---|
| 0.5 MPa | 352.5 N |
| 0.7 MPa | 513.4 N |
Single-acting push: air extends the rod; the return spring retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ASP Single Acting Guided Compact Cylinder ASP32X20SB
| ASP | DIN compact cylinder (single-acting push, spring-return, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ASP Single Acting Guided Compact Cylinder ASP32X20SB Is Used
Bench-top press jig
The 352.5 N push at 0.5 MPa is enough to seat small bearings or dowel pins in an electronics assembly fixture, with the spring clearing the part the moment air is released.
Robot cell part ejector
A 20 mm stroke is ideal for nudging machined housings off a locating nest between robot picks; the fitted -S magnet and a DMSE switch confirm ejection to the PLC.
Carton hold-down clamp
On a packaging line, the single acting push clamps flap-folders down for taping; one air line keeps plumbing simple and the TPU bumpers quiet the return stroke.
Replacing the Airtac ASP Single Acting Guided Compact Cylinder ASP32X20SB with the ASE32X20SB
At 32 mm bore you get 352.5 N at 0.5 MPa; if your load needs less, the 25 mm bore offers 210.1 N, and if it needs more, step up to the 40 mm bore at 556.8 N. The 20 mm stroke suits short clamp or eject moves, and speed runs 50-500 mm/s. FA/FB flange, LB foot and CA/CB clevis mountings bolt to the same face, and the fitted -S magnet accepts CMSE / DMSE switches. Since the ASP is discontinued, order ASE32X20 as the current replacement and verify the ISO 21287 mounting dimensions first.
Replacement checklist
- ✓ Current-production ACE → ASE32X20SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ASP Single Acting Guided Compact Cylinder ASP32X20SB FAQ
Push force is 352.5 N at 0.5 MPa and 513.4 N at 0.7 MPa, both already net of the return spring. It is single acting: air extends the rod, the spring retracts it, and at least 0.2 MPa is needed to move against the spring. Operating range is 0.2-1.0 MPa (28-145 psi), proof is 1.5 MPa (215 psi), speed is 50-500 mm/s, and the port is 1/8" PT with a male rod thread.
Order ASE32X20, the current-production ISO 21287 successor in the same 32 mm bore, 20 mm stroke and force class. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder and takes FA/FB flange, LB foot and CA/CB clevis brackets, but confirm the ISO 21287 mounting dimensions before swapping since the ASP is DIN-standard.
Related AirTAC ACE Cylinders
Request a Quote for the ASE32X20SB
Send us the quantity and destination. We confirm price, stock and lead time on the ASE32X20SB replacement — usually within 7-8 hours.