AirTAC 7V220 5/2-Way Double Solenoid Valve
Every listed AirTAC 7V220 configuration on one page: 24 order codes covering 3 port options and 4 coil voltages, from $43.02. Pick the port, voltage and lead length to see the exact order code and price.
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC 7V220
The AirTAC 7V220 is a 5/2-way double solenoid valve from the 7V 200 series: double solenoid with memory. A pulse on either coil shifts the spool, and it stays there until the other coil is pulsed, so the valve remembers its position through a power cut.
It is internally piloted and works from 0.15 to 0.8 MPa on air filtered to 40 µm, with no lubrication needed. The body is die-cast aluminum alloy with a flow-shaped cavity, and the pilot exhaust is collected inside the valve and vented through the R and S ports. The coil plugs in, draws AC 1.1 VA · DC 0.7 W, is class F and dust-protected, switches in 0.05 s or less, and its terminal can be inserted horizontally or vertically. The manual override is a push button or a slotted lock. The valve weighs 135 g and switches up to 5 times per second.
7V220 Technical Specifications
| Model | 7V220 |
|---|---|
| Function | 5/2-way double solenoid (double solenoid with memory) |
| Ports | PT1/4, Ø8 mm push-in (J08), Ø10 mm push-in (J10) |
| Exhaust ports | PT1/8 on the PT1/4 version |
| Effective area | 14.7 mm² (Cv 0.87) on PT1/4 |
| Weight | 135 g |
| Max frequency | 5 cycles/s |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Pilot | Internal |
| Operating pressure | 0.15 – 0.8 MPa (21 – 114 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -10 to +50 °C |
| Coil power | AC 1.1 VA · DC 0.7 W |
| Voltage tolerance | AC +15% / -10%, DC ±10% |
| Insulation | Class F, dust-protected |
| Body | Aluminum alloy |
| Lubrication | Not required |
Source: AirTAC catalog P80, 7V series specifications and ordering code. Effective area is the catalog figure for the PT1/4 port.
How the 7V220 Order Code Is Built
| 7V | 7V 5/2 and 5/3-way solenoid valve |
|---|---|
| 2 | Series: 200 |
| 20 | 10 single solenoid, 20 double solenoid, 30C/30E/30P 5/3-way center |
| J | Push-in A/B ports (blank = threaded) |
| 08 / J08 / J10 | Port: PT1/4, Ø8 mm push-in (J08), Ø10 mm push-in (J10) |
| B / A / C / F | Voltage: DC24V (B), AC220V (A), AC110V (C), DC12V (F) |
| 050 / 200 | Lead length 0.5 m / 2.0 m |
| G / T | Thread: G = G (BSPP), T = NPT, blank = PT |
All AirTAC 7V220 Order Codes (24)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Port | Voltage | Lead | Price | Select |
|---|---|---|---|---|---|
| 7V22008B050 | PT1/4 | DC24V (B) | Lead 0.5 m (050) | $43.02 | |
| 7V22008B200 | PT1/4 | DC24V (B) | Lead 2.0 m (200) | $45.35 | |
| 7V22008A050 | PT1/4 | AC220V (A) | Lead 0.5 m (050) | $43.02 | |
| 7V22008A200 | PT1/4 | AC220V (A) | Lead 2.0 m (200) | $45.35 | |
| 7V22008C050 | PT1/4 | AC110V (C) | Lead 0.5 m (050) | $43.02 | |
| 7V22008C200 | PT1/4 | AC110V (C) | Lead 2.0 m (200) | $45.35 | |
| 7V22008F050 | PT1/4 | DC12V (F) | Lead 0.5 m (050) | $43.02 | |
| 7V22008F200 | PT1/4 | DC12V (F) | Lead 2.0 m (200) | $45.35 | |
| 7V220J08B050 | Ø8 mm push-in (J08) | DC24V (B) | Lead 0.5 m (050) | $43.02 | |
| 7V220J08B200 | Ø8 mm push-in (J08) | DC24V (B) | Lead 2.0 m (200) | $45.35 | |
| 7V220J08A050 | Ø8 mm push-in (J08) | AC220V (A) | Lead 0.5 m (050) | $43.02 | |
| 7V220J08A200 | Ø8 mm push-in (J08) | AC220V (A) | Lead 2.0 m (200) | $45.35 | |
| 7V220J08C050 | Ø8 mm push-in (J08) | AC110V (C) | Lead 0.5 m (050) | $43.02 | |
| 7V220J08C200 | Ø8 mm push-in (J08) | AC110V (C) | Lead 2.0 m (200) | $45.35 | |
| 7V220J08F050 | Ø8 mm push-in (J08) | DC12V (F) | Lead 0.5 m (050) | $43.02 | |
| 7V220J08F200 | Ø8 mm push-in (J08) | DC12V (F) | Lead 2.0 m (200) | $45.35 | |
| 7V220J10B050 | Ø10 mm push-in (J10) | DC24V (B) | Lead 0.5 m (050) | $43.02 | |
| 7V220J10B200 | Ø10 mm push-in (J10) | DC24V (B) | Lead 2.0 m (200) | $45.35 | |
| 7V220J10A050 | Ø10 mm push-in (J10) | AC220V (A) | Lead 0.5 m (050) | $43.02 | |
| 7V220J10A200 | Ø10 mm push-in (J10) | AC220V (A) | Lead 2.0 m (200) | $45.35 | |
| 7V220J10C050 | Ø10 mm push-in (J10) | AC110V (C) | Lead 0.5 m (050) | $43.02 | |
| 7V220J10C200 | Ø10 mm push-in (J10) | AC110V (C) | Lead 2.0 m (200) | $45.35 | |
| 7V220J10F050 | Ø10 mm push-in (J10) | DC12V (F) | Lead 0.5 m (050) | $43.02 | |
| 7V220J10F200 | Ø10 mm push-in (J10) | DC12V (F) | Lead 2.0 m (200) | $45.35 |
Need a combination that is not listed? Request a quote.
Where the 7V220 Is Used
Cylinder control
Switches supply between the two ports of a double-acting cylinder.
Manifold valve banks
Mounts on a common base with one supply and exhaust.
Holds on power loss
A pulse on either coil shifts the spool, and it stays there until the other coil is pulsed, so the valve remembers its position through a power cut.
Choosing the Right 7V220 Configuration
Choose the port: threaded (PT1/4) or push-in A and B ports: Ø8 mm (J08), Ø10 mm (J10). Push-in (J) valves are used only on a 7V manifold base, which supplies P and the exhausts.
Choose the coil voltage to match your control circuit: DC24V (B), AC220V (A), AC110V (C), DC12V (F). Supply tolerance is AC +15% / -10% and DC ±10%.
The lead wire comes in 0.5 m (050) or 2.0 m (200).
For spring return use the 7V210; for a center position, the 5/3-way 30C, 30E or 30P.
Several valves can share a 7V200M manifold base (1 to 20 stations) with one supply and one exhaust.
AirTAC 7V220 FAQ
A pulse on either coil shifts the spool, and it stays there until the other coil is pulsed, so the valve remembers its position through a power cut.
0.15 – 0.8 MPa (21 – 114 psi), proof pressure 1.2 MPa, -10 to +50 °C, on air filtered to 40 µm. No lubrication is needed; if you do lubricate, keep it up and use ISO VG32 oil.
DC24V (B), AC220V (A), AC110V (C), DC12V (F). The letter after the port size gives the voltage; 050 or 200 after it is the lead length (0.5 m or 2.0 m).
No. Push-in valves have only the A and B ports on the valve; they mount on a 7V manifold base, which provides the supply and exhaust.
No. You can order a single piece. Orders are processed and handed to the carrier within 3-5 business days.
Buying the 7V220 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-13.
Request a Quote for the 7V220
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.