Airtac 7V Solenoid Valve 7V220J10F050
Genuine AirTAC solenoid valve, order code 7V220J10F050 from the 7V220 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- PortØ10 mm push-in (J10)
- Coil voltageDC12V (F)
- Lead wireLead 0.5 m (050)
- Function5/2-way double solenoid (double solenoid with memory)
- PortsPT1/4, Ø8 mm push-in (J08), Ø10 mm push-in (J10)
- Exhaust portsPT1/8 on the PT1/4 version
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 7V Solenoid Valve 7V220J10F050
Built on the 7V200 body, the AirTAC 7V220J10F050 is a 5/2-way double-solenoid valve with Dia 10 mm push-in A and B ports. A pulse on either coil shifts the spool and it stays there until the other coil is pulsed, so it keeps its position through a power cut. The push-in version has oval bottom ports and is used only on a 7V200M manifold base, which supplies P and the exhausts. The catalog flow on PT1/4 is 14.7 mm2 (Cv 0.87), measured on the threaded version. The DC12V coil (code F) draws 0.7 W, is class F and dust-protected, responds in 0.05 s or less and plugs in horizontally or vertically; the 050 code gives a 0.5 m lead.
It is pilot operated from 0.15 to 0.8 MPa (21-114 psi) on air filtered to 40 um, proof pressure 1.2 MPa, -10 to +50 C, at up to 5 cycles/s, and weighs 135 g. The die-cast aluminum-alloy body collects the pilot exhaust and vents it through the R and S ports. No lubrication is needed; once lubricated air is used, keep using it with ISO VG32 oil.
Airtac 7V Solenoid Valve 7V220J10F050 Technical Specifications
| Order code | 7V220J10F050 |
|---|---|
| Product | Solenoid Valve |
| Port | Ø10 mm push-in (J10) |
| Coil voltage | DC12V (F) |
| Lead wire | Lead 0.5 m (050) |
| Function | 5/2-way double solenoid (double solenoid with memory) |
|---|---|
| Ports | PT1/4, Ø8 mm push-in (J08), Ø10 mm push-in (J10) |
| Exhaust ports | PT1/8 on the PT1/4 version |
| Effective area | 14.7 mm² (Cv 0.87) on PT1/4 |
| Weight | 135 g |
| Max frequency | 5 cycles/s |
| Fluid | Air (filtered by 40 µm element) |
| Pilot | Internal |
| Operating pressure | 0.15 – 0.8 MPa (21 – 114 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -10 to +50 °C |
| Coil power | AC 1.1 VA · DC 0.7 W |
| Voltage tolerance | AC +15% / -10%, DC ±10% |
| Insulation | Class F, dust-protected |
| Body | Aluminum alloy |
| Lubrication | Not required |
Source: AirTAC catalog P80, 7V series specifications and ordering code. Effective area is the catalog figure for the PT1/4 port.
How to choose
Within the 7V220, AC220V, DC24V and AC110V coils replace the F with A/B/C; 7V220J10F200 has the 2.0 m lead; the other ports of this body are PT1/4 (7V22008F050) and Dia 8 mm push-in (7V220J08F050). The same body comes as 7V210, 7V230C, 7V230E and 7V230P: 10 single solenoid, 20 double solenoid, 30C/30E/30P the 5/3-way centers. Several 7V200 valves can share a 7V200M manifold base of 1 to 20 stations.
Applications
Holds position on power loss
A pulse from a 12 V DC supply switches the cylinder and the valve keeps that position until the other coil is pulsed.
Manifold valve banks
The Dia 10 mm push-in A and B ports take tubes straight on the valve while the 7V200M base carries supply and exhaust.
DC12V control circuits
The DC12V coil connects to a 12 V DC supply; the 0.5 m lead plugs into the coil terminal.
FAQ
What are the key figures of the 7V220J10F050?
5/2-way double-solenoid valve, 7V200 series; Dia 10 mm push-in ports; catalog flow 14.7 mm2 (Cv 0.87); 0.15-0.8 MPa (21-114 psi), proof 1.2 MPa; -10 to +50 C; up to 5 cycles/s; DC12V coil, 0.7 W, class F; 0.5 m lead; response 0.05 s or less; 135 g.
Can the 7V220J10F050 be piped on its own?
No. The push-in version has only the A and B ports on the valve; it mounts on a 7V200M manifold base, which provides the supply and exhaust.