Airtac JSI Series Standard Cylinder JSI32X16
The AirTAC Airtac JSI Series Standard Cylinder JSI32X16 is a genuine double acting JIS-standard air cylinder with a Ø32mm bore and 16mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke16 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI32X16
Delivering 402 N of push force at 0.5 MPa, this double-acting 32 mm bore cylinder fits where space is tight. As a JIS-standard profile unit, it occupies a shorter envelope than an ISO 15552 cylinder of the same bore. The extruded hard-anodized aluminum barrel removes external rods to resist wear, while a two-way piston seal retains grease for low-friction life.
This specific 16 mm stroke is a non-standard, made-to-order length for very short travel. Because it lacks the -S suffix, this SKU cannot host CMSE or DMSE sensors. Plan for roughly 241 N of real work at 0.5 MPa, which equates to lifting about 20 kg vertically with a 2:1 margin. The unit uses a G1/8 port and an M10x1.25 rod thread.
Airtac JSI Series Standard Cylinder JSI32X16 Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI32X16 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 16 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI32X16
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×16 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI32X16 Is Used
Micro-Clamping
Ideal for small part clamping on electronics assembly lines where a 16 mm travel and 402 N force secure delicate PCBs.
Gate Diverting
Drives short-stroke sorter flaps in packaging machinery, fitting into compact spaces where ISO 15552 cylinders are too long.
Pin Insertion
Handles light-duty pin pressing tasks in automated fixture stations, lifting roughly 20 kg vertically with a 2:1 margin.
Is the Airtac JSI Series Standard Cylinder JSI32X16 the Right Cylinder?
Since this is the smallest JSI bore, the next step up is the 40 mm version, which raises push force to 628 N at 0.5 MPa. For ultra-short travel like this 16 mm made-to-order stroke, side-load risks are minimal, but ensure the load is axially aligned. Without the -S magnet option, position sensing is unavailable on this SKU. Note that air loss or a centered valve will cause the piston to drift; the adjustable 20 mm cushions only decelerate the stroke end, so add a pilot-operated check valve if you must hold a load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI32X16 FAQ
This 32 mm bore cylinder features a G1/8 port. It generates 402 N push and 345 N pull at 0.5 MPa, 563 N push and 483 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
No. Because this SKU lacks the -S suffix, it has no magnet and cannot take CMSE or DMSE switches. You would need the -S variant for sensing. It is also a JIS profile cylinder, meaning it is shorter and more compact than a same-bore ISO 15552 unit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI32X16
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.