Airtac JSI Series Standard Cylinder JSI32X60S
The AirTAC Airtac JSI Series Standard Cylinder JSI32X60S is a genuine double acting JIS-standard air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI32X60S
Generating 402 N of push force at 0.5 MPa, this double-acting 32 mm bore cylinder saves valuable machine space by being noticeably shorter than an ISO 15552 unit of the same bore. The extruded hard-anodized aluminum barrel omits external rods to resist wear, while the two-way piston seal retains grease for a long, low-friction service life. Plan for roughly 241 N of real work at 0.5 MPa, which translates to lifting about 20 kg vertically with a 2:1 safety margin.
Because this SKU includes the -S magnet, you can drop CMSE or DMSE reed and electronic switches directly into the side sensor grooves for position detection. Air enters through the G1/8 port, and adjustable air cushions at both ends decelerate the piston smoothly near the stroke limits. The unit operates at 30-800 mm/s across a 0.15-1.0 MPa pressure range.
Airtac JSI Series Standard Cylinder JSI32X60S Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI32X60S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI32X60S
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI32X60S Is Used
Small Part Ejection
Uses the 402 N push force at 0.5 MPa to knock lightweight molded plastic parts out of an injection press tool.
Package Diverting
Actuates a routing flap on a packaging line, where the compact profile fits neatly between conveyor belts.
Clamp Actuation
Secures electronic PCBs during soldering, taking advantage of the 60 mm stroke and 345 N pull force.
Is the Airtac JSI Series Standard Cylinder JSI32X60S the Right Cylinder?
This 32 mm bore is the smallest available in the JSI series, so if your application requires less force you would need to look outside this family. If you need more power, stepping up to the 40 mm bore increases the 0.5 MPa push force to 628 N. The built-in -S magnet pairs perfectly with CMSE or DMSE switches for precise end-of-stroke feedback.
Remember that a standard pneumatic cylinder drifts if air pressure drops or the valve is centered, as the adjustable cushion only decelerates the piston near stroke end rather than locking it. To hold a vertical load securely, add an external rod lock or a pilot-operated check valve to your circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI32X60S FAQ
At 0.5 MPa it provides 402 N push and 345 N pull. At 0.7 MPa it provides 563 N push and 483 N pull. The theoretical maximum force is 82 kgf at 1.0 MPa. The air port size is G1/8.
The JSI is a JIS-standard profile cylinder that is shorter and more compact than an ISO 15552 cylinder of the same 32 mm bore, helping you save space on tight machinery without losing functionality.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI32X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.