Airtac GF Filter GF200C08MJW
The AirTAC Airtac GF Filter GF200C08MJW is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with See datasheet ports and a differential-pressure drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.
- TypeAir filter
- Port sizeSee datasheet
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
- Bowl materialPC
- ThreadPT
- BracketMounting bracket included
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GF Filter GF200C08MJW
GF200C08MJW is an AirTAC GF-series air filter for compressed air. It provides filtration only - no pressure regulation and no lubrication. This unit is size 200 with a 1/4 inch PT (standard) port, a W-specified 5 um fine filtration element, a manual drain, and no mounting bracket (J option).
This is a genuine AirTAC part. The GF family spans sizes 200, 300, 400 and 600, with 40 um standard or 5 um elements, differential-pressure, automatic or manual drains, and PT (standard), G or NPT threads as catalogue options. Maximum inlet pressure for this manual-drain filter is 0-0.9 MPa. Flow is published as curves rather than a single rating, so we confirm sizing and datasheet figures on request.
Airtac GF Filter GF200C08MJW Technical Specifications
| Model | Airtac GF Filter GF200C08MJW |
|---|---|
| Series | GF200 air filter |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Drain type | Differential-pressure drain |
| Bracket | Mounting bracket included |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Bowl material | PC |
| Feature | Low pressure loss |
Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GF Filter GF200C08MJW
| GF200 | G-series air filter, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain. Options are differential (blank), automatic (A) or manual (M). |
| (blank) | Mounting bracket included. A bracket ships by default; J orders it without. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.
Size Class
- GF200PT1/8" - PT1/4"
- GF300PT1/4" - PT1/2"
- GF400PT3/8" - PT1/2"
- GF600PT3/4" - PT1"
A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GF200 · See datasheet · 40 µm |
|---|---|
| One size up | GF300 |
| Line order | Filter first, then regulator, then lubricator |
Where the Airtac GF Filter GF200C08MJW Is Used
Laboratory instrument air feed
Use this filter on the supply line to lab analysers, air bearings or pneumatic sample-handling devices, where the 5 um element screens fine particulate that the standard grade would pass through to sensitive components.
Pilot-air supply to process control valves
Install ahead of positioner and pilot-air connections on control valves in a process skid. Clean, dry 5 um-filtered air keeps small orifices and pilot passages clear, and the manual drain fits a rounds-based maintenance walk.
Pneumatic air-bearing jig station
Fit on the 1/4 inch line feeding air-bearing fixtures or gripper stations on an assembly bench, where grit in the supply would score mating surfaces. The bracketless body mounts compactly behind the bench panel.
Is the Airtac GF Filter GF200C08MJW the Right Filter?
Choose the W element here when the 40 um standard grade is not fine enough for the downstream equipment; 5 um suits precision valves, sensors and instrumentation feeds. Size 200 with a 1/4 inch PT port fits compact machine-level supplies - move to 300/400/600 where port size and flow demand grow. Manual drain means someone must bleed the bowl periodically; select automatic drain for unattended locations. PT is the standard thread and G (BSPP) or NPT are order options; the J code omits the bracket.
Because GF-series flow is published as curves, not a single rated figure, ask us to confirm this size against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain: differential, automatic or manual
- ✓ Manual drain caps inlet at 0.9 MPa
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
Installation & Maintenance Notes
- check Mount vertically, bowl down, and follow the airflow arrow.
- check Put the filter first in the air-preparation line.
- check Keep inlet pressure within 0.15 - 1.0 MPa (22 - 145 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Replace the 40 µm element when pressure loss rises.
The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.
Airtac GF Filter GF200C08MJW FAQ
AirTAC does not publish a single rated flow number for the GF series; flow is given as curves over the pressure range. Rather than quote an estimate, we will pull the datasheet and confirm that size 200 at your line pressure covers your air demand - just ask on request before ordering.
The W position selects a 5 um filtration element instead of the 40 um standard grade, so this unit strips finer particulate from the compressed air. Everything else in the code is unchanged: 1/4 inch PT port, manual drain, no bracket, and filtration only - no regulation or lubrication.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GF Filter GF200C08MJW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.