Airtac GF Filter GF200C06
The AirTAC Airtac GF Filter GF200C06 is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with See datasheet ports and a differential-pressure drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.
- TypeAir filter
- Port sizeSee datasheet
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
- Bowl materialPC
- ThreadPT
- BracketMounting bracket included
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GF Filter GF200C06
The AirTAC GF200C06 is a G-series air filter from the 200 size, a genuine AirTAC part that removes water and particulate from compressed air without regulating pressure or adding lubricant. This configuration has PT1/8 in. ports (PT is the standard thread; G and NPT are orderable options), a 40 um standard filtration element, and a differential-pressure drain that ejects collected condensate automatically as flow conditions change - no day-to-day attention needed. Maximum working pressure is 1.0 MPa (145 psi), and the polycarbonate bowl suits the 200 size. Operating temperature is -5 to 70 C (non-freezing).
This is a genuine AirTAC component within the G-series filter line, which spans sizes 200, 300, 400 and 600 with your choice of drain type (differential-pressure, automatic or manual), a 5 um fine element option (code W), and bracket options. Flow is published by AirTAC as characteristic curves rather than a single rated figure, so contact us and we will confirm the datasheet and sizing figures for your application on request.
Airtac GF Filter GF200C06 Technical Specifications
| Model | Airtac GF Filter GF200C06 |
|---|---|
| Series | GF200 air filter |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Drain type | Differential-pressure drain |
| Bracket | Mounting bracket included |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Bowl material | PC |
| Feature | Low pressure loss |
Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GF Filter GF200C06
| GF200 | G-series air filter, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain. Options are differential (blank), automatic (A) or manual (M). |
| (blank) | Mounting bracket included. A bracket ships by default; J orders it without. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.
Size Class
- GF200PT1/8" - PT1/4"
- GF300PT1/4" - PT1/2"
- GF400PT3/8" - PT1/2"
- GF600PT3/4" - PT1"
A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GF200 · See datasheet · 40 µm |
|---|---|
| One size up | GF300 |
| Line order | Filter first, then regulator, then lubricator |
Where the Airtac GF Filter GF200C06 Is Used
Bench pneumatic press supply
Fitted ahead of a small bench-mounted pneumatic press or crimper, the filter strips water and pipe-scale carried over from the shop air ring main so the cylinder seals and spools stay clean. The 1/8 in. PT ports suit compact manifolds on light-duty pressing stations.
PLC-driven solenoid valve protection
Installed upstream of a bank of solenoid valves on an automation skid, the 40 um element catches particulate that would otherwise score valve seats and cause stuck spools. The differential-pressure drain clears condensate without operator rounds.
Air knife blow-off on a packaging line
Mounted on the supply leg of an air-knife blow-off station that dries bottles or cartons before labelling, the filter stops water carry-over that would spot the labels and keeps the nozzle orifices free of debris.
Is the Airtac GF Filter GF200C06 the Right Filter?
Use the size/port step to match your line: 200 with PT1/8 in. ports is the smallest G-series filter step, so size up to 300, 400 or 600 if your flow demand is higher - AirTAC publishes flow as curves, not one number, so ask us to confirm sizing against your compressor output and consumption before ordering. The standard 40 um element suits general plant-air protection; choose the W option (5 um) where downstream valves or instruments need finer particulate removal. Drain choice: this unit's differential-pressure drain is hands-off; pick manual (M) if you want visual control, or automatic (A) for continuous condensate ejection. Thread is PT as standard - G (BSPP) and NPT (T) are catalogue options to specify at order. A mounting bracket is included; order the J variant if you do not want one.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain: differential, automatic or manual
- ✓ Manual drain caps inlet at 0.9 MPa
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
Installation & Maintenance Notes
- check Mount vertically, bowl down, and follow the airflow arrow.
- check Put the filter first in the air-preparation line.
- check Keep inlet pressure within 0.15 - 1.0 MPa (22 - 145 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Replace the 40 µm element when pressure loss rises.
The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.
Airtac GF Filter GF200C06 FAQ
AirTAC publishes filter flow as characteristic curves across a pressure range rather than a single rated figure, so we do not quote one number here. Tell us your line pressure and air consumption and we will confirm the sizing figures from the datasheet on request.
This unit has a differential-pressure drain, which discharges condensate automatically in normal operation and needs no setting. The M variant uses a manual drain you operate yourself, and the A variant is a fully automatic float-type drain. All three fit the same 200-size bowl.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GF Filter GF200C06
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.