AirTAC GF200-06 Filter (GF20006MJ)
The AirTAC AirTAC GF200-06 Filter (GF20006MJ) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with PT1/8" ports and a manual drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.
- TypeAir filter
- Port sizePT1/8"
- Filtering grade40 µm
- DrainManual drain
- Inlet pressure0 - 0.9 MPa (0 - 131 psi)
- Bowl materialPC
- ThreadPT
- BracketSupplied without bracket
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GF200-06 Filter (GF20006MJ)
The GF20006MJ is an AirTAC G-series air filter: it removes water and particulate from compressed air and does nothing else - no pressure regulation and no lubrication. This size 200 unit has a PT1/8 port, the standard 40 um filter element, and a manual drain, so condensate is emptied by hand when you choose to open the bowl drain. The J suffix means this configuration comes without a mounting bracket.
This is a genuine AirTAC part in the GF family, which spans 200, 300, 400 and 600 sizes with optional G (BSPP) or NPT threads and automatic, manual or differential-pressure drains. Flow is published as curves rather than a single rating, so we confirm the datasheet and flow figures for your application on request.
AirTAC GF200-06 Filter (GF20006MJ) Technical Specifications
| Model | AirTAC GF200-06 Filter (GF20006MJ) |
|---|---|
| Series | GF200 air filter |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Drain type | Manual drain |
| Bracket | Supplied without bracket |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0 - 0.9 MPa (0 - 131 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Bowl material | PC |
| Feature | Low pressure loss |
Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GF200-06 Filter (GF20006MJ)
| GF200 | G-series air filter, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain. Options are differential (blank), automatic (A) or manual (M). |
| J | Supplied without bracket. A bracket ships by default; J orders it without. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.
Size Class
- GF200PT1/8" - PT1/4"
- GF300PT1/4" - PT1/2"
- GF400PT3/8" - PT1/2"
- GF600PT3/4" - PT1"
A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GF200 · PT1/8" · 40 µm |
|---|---|
| One size up | GF300 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GF200-06 Filter (GF20006MJ) Is Used
Small pneumatic press
Clean, dry supply air to a compact bench pneumatic press or riveter, where the filter strips pipe scale and water before the directional valve and cylinder.
Lab air line
Point-of-use particle and moisture removal on a laboratory compressed-air drop feeding air-actuated valves and small actuators.
Packaging machinery
Pre-filtration ahead of the solenoid manifold on a small cartoner or labeling machine, protecting the valve seats from condensate carryover.
Is the AirTAC GF200-06 Filter (GF20006MJ) the Right Filter?
Size 200 is the smallest step in the G series, with a 1/8 in port suited to compact air lines; step up to 300/400/600 if your line flow demands a larger port. The standard element is 40 um; choose the W version for 5 um filtration. This manual-drain model suits installations where someone can periodically vent collected water; pick automatic or differential-pressure drain if the unit sits where manual attention is impractical. The J suffix omits the bracket - order the blank variant if you need one to bolt the unit to a panel or machine frame.
Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering. Thread is PT as standard; G (BSPP) and NPT are catalogue options to order.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain: differential, automatic or manual
- ✓ Manual drain caps inlet at 0.9 MPa
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
Installation & Maintenance Notes
- check Mount vertically, bowl down, and follow the airflow arrow.
- check Put the filter first in the air-preparation line.
- check Keep inlet pressure within 0 - 0.9 MPa (0 - 131 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Replace the 40 µm element when pressure loss rises.
The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.
AirTAC GF200-06 Filter (GF20006MJ) FAQ
AirTAC publishes filter flow as curves across the pressure range, not as a single rated number, so there is no one figure we can quote honestly. Send us your line pressure and air demand and we will confirm the datasheet and the flow curve for this exact model on request before you order.
The M in this code selects a manual drain: you open the bowl drain by hand to release collected condensate. If the unit is mounted where nobody tends it regularly, choose the automatic-drain (A) or differential-pressure (blank) variant instead - same filter, different drain.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GF200-06 Filter (GF20006MJ)
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.