Airtac GF Filter GF200C06J
The AirTAC Airtac GF Filter GF200C06J is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with See datasheet ports and a differential-pressure drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.
- TypeAir filter
- Port sizeSee datasheet
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
- Bowl materialPC
- ThreadPT
- BracketMounting bracket included
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GF Filter GF200C06J
The AirTAC GF200C06J is a G-series air filter in the 200 size - a genuine AirTAC part providing water and particulate removal only, with no pressure regulation and no lubrication. The J code means no mounting bracket is supplied, so this version suits installations where the unit is inline-mounted, panel-adjacent, or carried on existing hardware. It has PT1/8 in. ports (PT is the standard thread; G and NPT are catalogue options), a 40 um standard element, and a differential-pressure drain that clears condensate automatically. Maximum working pressure is 1.0 MPa (145 psi); temperature range is -5 to 70 C (non-freezing), with a polycarbonate bowl on the 200 size.
This belongs to the AirTAC G-series filter family, available in sizes 200, 300, 400 and 600 with manual or automatic drain options, a 5 um fine element (code W), and bracket or no-bracket variants. Flow figures appear in the AirTAC datasheet as curves rather than a single rating - request the datasheet from us and we will confirm the numbers for your application.
Airtac GF Filter GF200C06J Technical Specifications
| Model | Airtac GF Filter GF200C06J |
|---|---|
| Series | GF200 air filter |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Drain type | Differential-pressure drain |
| Bracket | Mounting bracket included |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Bowl material | PC |
| Feature | Low pressure loss |
Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GF Filter GF200C06J
| GF200 | G-series air filter, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain. Options are differential (blank), automatic (A) or manual (M). |
| (blank) | Mounting bracket included. A bracket ships by default; J orders it without. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.
Size Class
- GF200PT1/8" - PT1/4"
- GF300PT1/4" - PT1/2"
- GF400PT3/8" - PT1/2"
- GF600PT3/4" - PT1"
A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GF200 · See datasheet · 40 µm |
|---|---|
| One size up | GF300 |
| Line order | Filter first, then regulator, then lubricator |
Where the Airtac GF Filter GF200C06J Is Used
Conveyor gate cylinder air feed
Placed inline on the supply to sorting-gate or stopper cylinders along a conveyor run, the filter removes moisture and rust particles from the header air before they reach the valve island and cylinder seals. The no-bracket format suits spool-mounted pipework.
Mobile cart air tool drop
Used on a maintenance cart's air drop feeding impact drivers and ratchets, the filter keeps compressor water out of the tool motors. With no bracket, it ties directly into the hose bundle and regulator stack already on the cart.
Textile machine air jet supply
Installed ahead of air-jet nozzles on textile weaving or spinning equipment, the 40 um element stops fibre-binding particulate and the differential-pressure drain keeps condensate out of the jet air, protecting fabric quality.
Is the Airtac GF Filter GF200C06J the Right Filter?
Choose the J version when your mounting scheme already provides support - for example inline spooling on existing pipe hangers or a manifold where the bowl hangs clear - otherwise the bracketed base unit simplifies wall or machine-frame mounting. The PT1/8 in. ports and 200 size are the smallest G-series step; step up to 300/400/600 for heavier air demand, and let us confirm the flow curve against your consumption before you order. The 40 um element covers general plant air; the W option (5 um) protects finer downstream components. If you prefer hands-on condensate control, the M manual-drain variant is available; this unit's differential-pressure drain needs no attention. Specify G (BSPP) or NPT (T) at order if PT is not your standard.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain: differential, automatic or manual
- ✓ Manual drain caps inlet at 0.9 MPa
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
Installation & Maintenance Notes
- check Mount vertically, bowl down, and follow the airflow arrow.
- check Put the filter first in the air-preparation line.
- check Keep inlet pressure within 0.15 - 1.0 MPa (22 - 145 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Replace the 40 µm element when pressure loss rises.
The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.
Airtac GF Filter GF200C06J FAQ
AirTAC does not publish a single rated flow number for this filter; performance is given as flow characteristic curves in the datasheet. Send us your operating pressure and consumption and we will confirm the sizing from the datasheet on request.
The J code at the end of GF200C06J is the AirTAC no-bracket option. Function is otherwise identical to GF200C06: same PT1/8 in. ports, 40 um element and differential-pressure drain. If you need wall or frame mounting, order the bracketed GF200C06 instead.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GF Filter GF200C06J
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.