AirTAC GF200-08 Filter (GF20008W)
The AirTAC AirTAC GF200-08 Filter (GF20008W) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 5 µm element, with PT1/4" ports and a differential-pressure drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.
- TypeAir filter
- Port sizePT1/4"
- Filtering grade5 µm
- DrainDifferential-pressure drain
- Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
- Bowl materialPC
- ThreadPT
- BracketMounting bracket included
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GF200-08 Filter (GF20008W)
GF20008W is an AirTAC G-series air filter in size 200 with a 1/4 in PT port, removing water and particulate from compressed air only - no regulation, no lubrication. With no drain letter in the code, this unit carries the default differential-pressure drain, and the W suffix selects the finer 5 um filter element. The mounting bracket is included and the size 200 bowl is polycarbonate (PC). Maximum working (inlet) pressure is 1.0 MPa (145 psi); working temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The G-series filter family spans size 200 to 600 with a port and flow step at each size, and is available with differential-pressure (default), automatic or manual drains, 40 um or 5 um elements, G (BSPP) or NPT threads as catalogue options, and with or without a bracket. Flow and datasheet figures are confirmed on request.
AirTAC GF200-08 Filter (GF20008W) Technical Specifications
| Model | AirTAC GF200-08 Filter (GF20008W) |
|---|---|
| Series | GF200 air filter |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Drain type | Differential-pressure drain |
| Bracket | Mounting bracket included |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Bowl material | PC |
| Feature | Low pressure loss |
Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GF200-08 Filter (GF20008W)
| GF200 | G-series air filter, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain. Options are differential (blank), automatic (A) or manual (M). |
| (blank) | Mounting bracket included. A bracket ships by default; J orders it without. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.
Size Class
- GF200PT1/8" - PT1/4"
- GF300PT1/4" - PT1/2"
- GF400PT3/8" - PT1/2"
- GF600PT3/4" - PT1"
A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GF200 · PT1/4" · 5 µm |
|---|---|
| One size up | GF300 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GF200-08 Filter (GF20008W) Is Used
Rotary-screw compressor after-filter
Fit on the outlet side of a rotary-screw compressor's dryer takeoff so the 5 um element catches desiccant dust and condensed water on the main 1/4 in branch, with the differential drain handling condensate as flow passes.
Sortation conveyor diverters
Install ahead of the diverter and stopper cylinders on a parcel sortation conveyor, where continuous cycling and the automatic action of the differential drain suit an unattended 24/7 line.
Pneumatic sensor and gauge supply
Use on the clean-air branch feeding air-operated sensors, jet nozzles and indicating gauges in a process line, where the 5 um grade protects small orifices from particulate carryover.
Is the AirTAC GF200-08 Filter (GF20008W) the Right Filter?
Choose the size digits (200/300/400/600) to set the port and flow path; size 200 gives this 1/4 in PT port. Drain options are the differential-pressure type fitted here (default), a fully automatic drain, or a manual drain - the latter two are separate order codes. The W element filters to 5 um; drop the W for the standard 40 um grade if coarser filtration is acceptable. PT is the standard thread, with G (BSPP) and NPT available as options, and the bracket is included in this code. Flow is published as curves, not a single rated figure - ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain: differential, automatic or manual
- ✓ Manual drain caps inlet at 0.9 MPa
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
Installation & Maintenance Notes
- check Mount vertically, bowl down, and follow the airflow arrow.
- check Put the filter first in the air-preparation line.
- check Keep inlet pressure within 0.15 - 1.0 MPa (22 - 145 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Replace the 5 µm element when pressure loss rises.
The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.
AirTAC GF200-08 Filter (GF20008W) FAQ
We do not quote a single rated flow because AirTAC publishes G-series flow as curves, not one number. Provide your line pressure and demand and we will confirm the matching datasheet figures on request so the size 200, 1/4 in unit can be checked against your duty.
It is the default drain type for G-series filters: condensate is discharged automatically as the flow differential across the element builds, with no manual attention. It differs from the manual-drain code (hand-release, 0.9 MPa inlet limit) and the automatic-drain code, both orderable separately in the same size 200, 5 um configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GF200-08 Filter (GF20008W)
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.