AirTAC GF200-06 Filter (GF20006MJW)
The AirTAC AirTAC GF200-06 Filter (GF20006MJW) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 5 µm element, with PT1/8" ports and a manual drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.
- TypeAir filter
- Port sizePT1/8"
- Filtering grade5 µm
- DrainManual drain
- Inlet pressure0 - 0.9 MPa (0 - 131 psi)
- Bowl materialPC
- ThreadPT
- BracketSupplied without bracket
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GF200-06 Filter (GF20006MJW)
The GF20006MJW is an AirTAC G-series air filter that removes water and particulate from compressed air only - no regulation, no lubrication. This size 200 unit has a PT1/8 port, a fine 5 um filter element (the W option, versus the standard 40 um), and a manual drain you open by hand to empty condensate. The J suffix means no mounting bracket is supplied.
This is a genuine AirTAC part in the GF family, available in 200/300/400/600 sizes with G (BSPP) or NPT thread options and automatic, manual or differential-pressure drains. Flow is published as curves rather than a single rating; we confirm datasheet figures for your application on request.
AirTAC GF200-06 Filter (GF20006MJW) Technical Specifications
| Model | AirTAC GF200-06 Filter (GF20006MJW) |
|---|---|
| Series | GF200 air filter |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Drain type | Manual drain |
| Bracket | Supplied without bracket |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0 - 0.9 MPa (0 - 131 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Bowl material | PC |
| Feature | Low pressure loss |
Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GF200-06 Filter (GF20006MJW)
| GF200 | G-series air filter, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain. Options are differential (blank), automatic (A) or manual (M). |
| J | Supplied without bracket. A bracket ships by default; J orders it without. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.
Size Class
- GF200PT1/8" - PT1/4"
- GF300PT1/4" - PT1/2"
- GF400PT3/8" - PT1/2"
- GF600PT3/4" - PT1"
A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GF200 · PT1/8" · 5 µm |
|---|---|
| One size up | GF300 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GF200-06 Filter (GF20006MJW) Is Used
Precision pneumatic tooling
Fine pre-filtration on the air feed to a small pneumatic screwdriver or riveting station, keeping fine particles out of the tool motor.
Pick-and-place modules
Clean, filtered air to compact vacuum ejectors and mini cylinders on a small pick-and-place module, where fine grit shortens seal life.
Workshop air drops
Point-of-use polishing of shop air at an individual workbench drop, protecting hand-held air tools fed through a 1/8 in line.
Is the AirTAC GF200-06 Filter (GF20006MJW) the Right Filter?
Choose the 5 um W element over the standard 40 um when downstream equipment tolerates finer contamination, noting a finer element loads faster and needs more frequent manual draining. Size 200 with a 1/8 in port is the compact end of the G series; move to 300/400/600 for larger lines. Manual drain suits attended installations; pick automatic or differential-pressure drain otherwise. No bracket is included with this J variant - the blank-suffix version carries one.
Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering. PT is the standard thread; G (BSPP) and NPT are catalogue options to order.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain: differential, automatic or manual
- ✓ Manual drain caps inlet at 0.9 MPa
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
Installation & Maintenance Notes
- check Mount vertically, bowl down, and follow the airflow arrow.
- check Put the filter first in the air-preparation line.
- check Keep inlet pressure within 0 - 0.9 MPa (0 - 131 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Replace the 5 µm element when pressure loss rises.
The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.
AirTAC GF200-06 Filter (GF20006MJW) FAQ
There is no single rated flow figure to quote: AirTAC publishes filter performance as flow curves across the pressure range. Tell us your working pressure and air consumption and we will confirm the datasheet and flow curve for this model on request before you order.
W selects the 5 um filter element instead of the 40 um standard. That means finer particle removal downstream, at the cost of an element that clogs sooner - worth pairing with regular manual draining, which this M-code unit requires.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GF200-06 Filter (GF20006MJW)
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.