AirTAC GF200-08 Filter (GF20008MJ)
The AirTAC AirTAC GF200-08 Filter (GF20008MJ) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with PT1/4" ports and a manual drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.
- TypeAir filter
- Port sizePT1/4"
- Filtering grade40 µm
- DrainManual drain
- Inlet pressure0 - 0.9 MPa (0 - 131 psi)
- Bowl materialPC
- ThreadPT
- BracketSupplied without bracket
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GF200-08 Filter (GF20008MJ)
GF20008MJ is an AirTAC G-series air filter in size 200 with a 1/4 in PT port. It removes water and particulate from compressed air only - there is no pressure regulation and no lubrication. This configuration carries a manual drain, so condensate collected in the bowl is released by hand, and the standard 40 um filter element. The size 200 bowl is polycarbonate (PC), and code J means no mounting bracket is supplied. Maximum inlet pressure with the manual drain is 0.9 MPa; working temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The G-series filter family runs from size 200 to 600, with larger ports and greater flow capacity at each step, and is available with differential-pressure (default), automatic or manual drains, a 5 um element (code W), G (BSPP) or NPT threads as catalogue options, and with or without a bracket. Flow and datasheet figures are confirmed on request.
AirTAC GF200-08 Filter (GF20008MJ) Technical Specifications
| Model | AirTAC GF200-08 Filter (GF20008MJ) |
|---|---|
| Series | GF200 air filter |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Drain type | Manual drain |
| Bracket | Supplied without bracket |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0 - 0.9 MPa (0 - 131 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Bowl material | PC |
| Feature | Low pressure loss |
Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GF200-08 Filter (GF20008MJ)
| GF200 | G-series air filter, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain. Options are differential (blank), automatic (A) or manual (M). |
| J | Supplied without bracket. A bracket ships by default; J orders it without. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.
Size Class
- GF200PT1/8" - PT1/4"
- GF300PT1/4" - PT1/2"
- GF400PT3/8" - PT1/2"
- GF600PT3/4" - PT1"
A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GF200 · PT1/4" · 40 µm |
|---|---|
| One size up | GF300 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GF200-08 Filter (GF20008MJ) Is Used
CNC tool-changer air drop
Install at the point of use on a machining center's tool-changer and clamp circuit to strip water and chips-laden particulate before the directional valves; the manual drain is opened at shift start.
Packaging line actuator supply
Fit upstream of the cylinders and grippers on a carton-forming packaging line so condensate and pipe scale are kept out of the 1/4 in valve manifold feeding the motion axes.
Assembly-station air drops
Mount as the first element on a bench drop in an assembly cell, protecting air guns, clamps and small actuators from rust and water carried in the plant ring main.
Is the AirTAC GF200-08 Filter (GF20008MJ) the Right Filter?
Use the size digits (200/300/400/600) to step port size and flow path up or down; this size 200 unit carries a 1/4 in PT port. Choose the drain type: manual (this model - condensate is hand-released, inlet 0-0.9 MPa), automatic for unattended draining, or the default differential-pressure type. Element grade is 40 um standard; add W for the 5 um element where finer filtration is needed. PT is the standard thread; G (BSPP) and NPT are catalogue thread options to order. Code J omits the mounting bracket. Flow is published as curves, not a single rated figure - ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain: differential, automatic or manual
- ✓ Manual drain caps inlet at 0.9 MPa
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
Installation & Maintenance Notes
- check Mount vertically, bowl down, and follow the airflow arrow.
- check Put the filter first in the air-preparation line.
- check Keep inlet pressure within 0 - 0.9 MPa (0 - 131 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Replace the 40 µm element when pressure loss rises.
The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.
AirTAC GF200-08 Filter (GF20008MJ) FAQ
AirTAC publishes flow for the G-series filters as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow data from the datasheet on request before you order.
A manual drain means you release condensate by hand, which suits points of use that are checked regularly; the inlet limit for this version is 0.9 MPa. If the unit runs unattended, choose the automatic drain, or the default differential-pressure type - both are orderable in the same size 200, 1/4 in port configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GF200-08 Filter (GF20008MJ)
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.