Airtac JSI Series Standard Cylinder JSI100X160
The AirTAC Airtac JSI Series Standard Cylinder JSI100X160 is a genuine double acting JIS-standard air cylinder with a Ø100mm bore and 160mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke160 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI100X160
Delivering 3927 N of push force at 0.5 MPa, this double-acting JIS-standard profile cylinder saves valuable machine space by being noticeably shorter than a same-bore ISO 15552 unit. The extruded hard-anodized aluminum barrel omits external rods to resist wear, while the two-way piston seal retains grease for a long, low-friction service life. Because this specific SKU lacks the -S magnet, it cannot host CMSE or DMSE position switches.
With a 100 mm bore and G1/2 port, it provides a safe working load of about 2356 N for real-world tasks, which translates to lifting roughly 200 kg vertically with a 2:1 safety margin. The 32 mm carbon steel rod is hard-chrome plated, and adjustable 33 mm air cushions at both ends absorb end-of-stroke impact. For jobs needing dual rods or adjustable stroke lengths, consider the related JSID or JSIJ series.
Airtac JSI Series Standard Cylinder JSI100X160 Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI100X160 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI100X160
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI100X160 Is Used
Injection Mold Clamping
Provides the heavy 3927 N push force needed to secure injection mold halves, utilizing its 160 mm stroke to clear the tooling during part ejection.
Pallet Stopper Gate
Acts as a robust pneumatic stopper on heavy-duty roller conveyors, halting loaded pallets weighing up to 200 kg before they enter a wrapping station.
Press Pin Insertion
Drives steel alignment pins into thick automotive chassis components on an assembly line, using adjustable end cushions to protect the 32 mm rod from impact shock.
Is the Airtac JSI Series Standard Cylinder JSI100X160 the Right Cylinder?
When sizing this 100 mm bore actuator, dropping down to the JSI80X160 reduces the footprint and yields 2513 N of push at 0.5 MPa, whereas stepping up to the JSI125X160 provides a substantial 6136 N if your air supply can support it. Since this 160 mm stroke falls under the 300 mm threshold, side-load rod bending is less of a concern, but you should still align the load precisely to avoid premature seal wear.
Remember that a standard cylinder drifts if air pressure is lost or the valve is centered, as the cushions only decelerate the piston near stroke ends rather than locking it. To suspend a load safely, install an external rod lock or a pilot-operated check valve. Furthermore, because this configuration ships without a magnet, you must select an -S variant if your control system requires electronic position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI100X160 FAQ
This 100 mm bore cylinder features a G1/2 air port and a 32 mm rod. It generates 3927 N push and 3574 N pull at 0.5 MPa, 5497 N push and 5003 N pull at 0.7 MPa, with a theoretical maximum of 801 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet. You must purchase the -S variant of the JSI100 to utilize CMSE or DMSE electronic switches in the side sensor grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI100X160
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.