Airtac JSI Series Standard Cylinder JSI100X180
The AirTAC Airtac JSI Series Standard Cylinder JSI100X180 is a genuine double acting JIS-standard air cylinder with a Ø100mm bore and 180mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke180 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI100X180
Delivering 3927 N of push force at 0.5 MPa, this 100 mm bore double-acting actuator fits heavy automation into tight spaces. Its JIS-standard extruded aluminium profile is noticeably shorter than an ISO 15552 cylinder of the same bore, saving valuable machine footprint without sacrificing power. The hard-anodized barrel omits external rods to resist wear, while the two-way NBR piston seal retains grease for a long, low-friction service life.
Because this specific SKU lacks the -S magnet, it cannot host CMSE or DMSE position switches. For sizing real tasks, plan for roughly 2356 N of actual work at 0.5 MPa, which translates to lifting about 200 kg vertically with a 2:1 safety margin. The unit features a G1/2 port, an M26x1.5 rod thread, and 33 mm adjustable air cushions at both ends to smooth out high-speed 30-800 mm/s strokes.
Airtac JSI Series Standard Cylinder JSI100X180 Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI100X180 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI100X180
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI100X180 Is Used
Injection Mould Unloading
Provides the robust 3927 N push force needed to eject bulky plastic automotive interior panels from a 200-ton press, utilizing the 180 mm stroke to clear the mould halves safely.
Heavy Pallet Diversion
Acts as a heavy-duty diverter on a packaging line, using its compact JIS profile to fit within tight conveyor framework while pushing loaded pallets onto a secondary spur.
Lift Gate Actuation
Raises and lowers a 150 kg material lift gate in a distribution hub, operating well within the 200 kg vertical lift capacity to ensure smooth and reliable vertical movement.
Is the Airtac JSI Series Standard Cylinder JSI100X180 the Right Cylinder?
If 3927 N at 0.5 MPa is more than your process requires, the 80 mm bore offers 2513 N of push force. For heavier demands, the 125 mm bore steps up to 6136 N. Since this 180 mm stroke is under 300 mm, rod bending is less of a concern, but always guide the load rigidly to prevent side loads from damaging the front cover packing. To add magnetic sensing, you must select the -S variant instead of this model.
Remember that standard pneumatic operation will not hold a load securely if air pressure drops or the valve is centred; the piston will drift. The integrated cushions only decelerate the rod near the stroke ends and do not act as a mechanical brake. For suspended or vertical loads that must remain fixed during a failure, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI100X180 FAQ
This 100 mm bore cylinder generates 3927 N push and 3574 N pull at 0.5 MPa, increasing to 5497 N push and 5003 N pull at 0.7 MPa. The theoretical maximum force is 801 kgf at 1.0 MPa. It uses a G1/2 air port and features a 32 mm piston rod with an M26x1.5 thread.
The JSI is a JIS-standard profile cylinder that is shorter and more compact than an ISO 15552 cylinder of the same bore, saving machine space. It uses an extruded hard-anodized aluminum barrel without external rods. Note that this specific SKU has no -S magnet, so it cannot support CMSE or DMSE magnetic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI100X180
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.