Airtac JSI Series Standard Cylinder JSI100X500TC
The AirTAC Airtac JSI Series Standard Cylinder JSI100X500TC is a genuine double acting JIS-standard air cylinder with a Ø100mm bore and 500mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke500 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI100X500TC
Delivering 3927 N of push force at 0.5 MPa, this double-acting JIS-standard profile cylinder is built for heavy-duty machinery. Its extruded hard-anodized aluminum barrel omits external rods, making it shorter and more compact than an ISO 15552 cylinder of the same 100 mm bore. The internal two-way piston seal retains grease, ensuring low-friction operation over a long service life. Equipped with a G1/2 port and an M26x1.5 rod thread, it handles a 500 mm stroke while operating at speeds between 30 and 800 mm/s.
Because this specific SKU lacks the -S magnet, it cannot accept CMSE or DMSE position switches. For real-world sizing, plan for about 2356 N of actual work at 0.5 MPa, which safely lifts roughly 200 kg vertically with a 2:1 margin. Adjustable 33 mm air cushions at both ends absorb kinetic energy near stroke end, though they do not function as a brake.
Airtac JSI Series Standard Cylinder JSI100X500TC Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI100X500TC |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI100X500TC
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI100X500TC Is Used
Injection Mold Clamping
Provides the 5497 N push force at 0.7 MPa needed to secure heavy mold halves during plastic injection cycles.
Pallet Diverting
Leverages the 500 mm stroke and TC trunnion mount to push large loaded pallets across high-speed packaging lines.
Heavy Crate Stacking
Handles vertical lifting tasks up to 200 kg with a 2:1 safety margin, ideal for automated storage and retrieval systems.
Is the Airtac JSI Series Standard Cylinder JSI100X500TC the Right Cylinder?
When sizing this 100 mm bore against neighboring options, the smaller JSI80 provides 2513 N of push force at 0.5 MPa, while the larger JSI125 offers 6136 N. If your application demands position feedback, you must step up to the JSI100X500TC-S variant to enable CMSE or DMSE sensors. The included TC trunnion mount supports pivoting articulation. Spanning 500 mm, this long stroke requires external guide rails to prevent rod bending and absorb side loads. Remember that standard pneumatic operation drifts when air is lost; install a pilot-operated check valve or external rod lock to hold suspended loads securely.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI100X500TC FAQ
This 100 mm bore cylinder features a G1/2 port and delivers 3927 N push / 3574 N pull at 0.5 MPa, 5497 N push / 5003 N pull at 0.7 MPa, with a theoretical maximum of 801 kgf at 1.0 MPa.
As a JIS-standard profile cylinder, it is shorter and more compact than an ISO 15552 cylinder of the same bore. The end cushions only decelerate the piston; they do not lock it, so you need an external rod lock to hold loads safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI100X500TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.