Airtac JSI Series Standard Cylinder JSI100X800TC
The AirTAC Airtac JSI Series Standard Cylinder JSI100X800TC is a genuine double acting JIS-standard air cylinder with a Ø100mm bore and 800mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke800 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI100X800TC
Delivering 3927 N of push force at 0.5 MPa, the AirTAC JSI100X800TC is a robust double-acting JIS-standard profile cylinder built for heavy-duty machinery. Its extruded hard-anodized aluminum barrel omits external rods, making the overall body shorter and more compact than an ISO 15552 cylinder of the same 100 mm bore. The internal two-way piston seal retains grease, ensuring low-friction operation over a long service life.
This specific SKU lacks the -S magnet, meaning it cannot accept CMSE or DMSE position sensors without upgrading to the magnet-equipped variant. For real-world sizing, plan for about 2356 N of actual work at 0.5 MPa, which translates to lifting roughly 200 kg vertically with a 2:1 safety margin. The unit features a G1/2 port, an M26x1.5 rod thread, and 33 mm adjustable air cushions at both ends to absorb kinetic energy.
Airtac JSI Series Standard Cylinder JSI100X800TC Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI100X800TC |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI100X800TC
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI100X800TC Is Used
Automotive Body Welding
Handles heavy clamping duties on welding fixtures, using its 3927 N push force to hold steel panels securely during robotic fusion processes.
Pallet Transfer Line
Actuates large 800 mm strokes to push loaded pallets between conveyor sections, relying on the TC trunnion to accommodate pivoting arc movement.
Heavy Carton Pusher
Indexes bulky packaging goods across sorting stations, where the hard-anodized barrel withstands continuous industrial operation.
Is the Airtac JSI Series Standard Cylinder JSI100X800TC the Right Cylinder?
When sizing this 100 mm bore against adjacent models, stepping down to the 80 mm yields 2513 N of push at 0.5 MPa, while the larger 125 mm bore provides 6136 N. The included TC trunnion mount is ideal for pivoting applications, but because this model has an 800 mm stroke, external guide rails are strongly recommended to prevent rod bending and excessive side-loading. Note that a standard cylinder drifts when air is lost or the valve is centered; the cushions only decelerate the piston near stroke ends and will not hold a load. For suspended loads, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI100X800TC FAQ
This 100 mm bore cylinder delivers 3927 N push and 3574 N pull at 0.5 MPa, 5497 N push and 5003 N pull at 0.7 MPa, with a theoretical maximum of 801 kgf at 1.0 MPa. It uses a G1/2 air port and an M26x1.5 rod thread.
No, this specific SKU does not include the -S magnet, so CMSE or DMSE switches cannot be used. You must select the -S variant to enable drop-in sensors along the side grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI100X800TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.