Airtac JSI Series Standard Cylinder JSI100X340TC
The AirTAC Airtac JSI Series Standard Cylinder JSI100X340TC is a genuine double acting JIS-standard air cylinder with a Ø100mm bore and 340mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke340 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI100X340TC
Delivering 3927 N of push force at 0.5 MPa, the AirTAC JSI100X340TC is a double-acting JIS-standard profile cylinder built for heavy machinery. Its extruded hard-anodized aluminum barrel omits external rods, making it shorter and more compact than an ISO 15552 cylinder of the same bore. A heterogeneous two-way piston seal retains grease for low-friction longevity, while the G1/2 port handles high flow volumes.
Because this SKU lacks the -S magnet, it cannot accept CMSE or DMSE position switches. For real-world sizing, plan for about 2356 N of actual work at 0.5 MPa, which translates to lifting roughly 200 kg vertically with a 2:1 safety margin. The 32 mm carbon steel rod and 33 mm adjustable air cushions at both ends manage end-of-stroke impact.
Airtac JSI Series Standard Cylinder JSI100X340TC Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI100X340TC |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 340 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI100X340TC
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×340 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI100X340TC Is Used
Press Ejection
Provides the 3927 N push at 0.5 MPa needed to knock heavy stamped metal panels out of a 340 mm deep hydraulic press bed.
Pallet Diversion
Uses the TC trunnion pivot to swing heavy product pallets across a high-speed packaging line without stressing the mounting pins.
Vertical Gate Actuation
Raises 150 kg material handling safety gates through the 340 mm travel, relying on the hard-anodized barrel for wear resistance.
Is the Airtac JSI Series Standard Cylinder JSI100X340TC the Right Cylinder?
When sizing this 100 mm bore against its neighbors, stepping down to a JSI80 yields 2513 N push at 0.5 MPa, whereas moving up to a JSI125 provides 6136 N. The included TC trunnion mount suits pivoting loads, but a plain cylinder drifts when air is lost or a valve centers—the cushion only decelerates the piston, so add an external rod lock or pilot-operated check valve to hold a suspended mass. Because the 340 mm stroke increases the risk of rod bending under offset loads, use external guide rails to absorb side forces.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI100X340TC FAQ
This 100 mm bore cylinder features a G1/2 port and a 32 mm rod. It generates 3927 N push and 3574 N pull at 0.5 MPa, 5497 N push and 5003 N pull at 0.7 MPa, with a theoretical maximum of 801 kgf at 1.0 MPa.
The extruded aluminum profile is shorter and more compact than a same-bore ISO 15552 cylinder, saving valuable machine space. The TC trunnion allows pivoting, but note this SKU lacks a magnet, so CMSE/DMSE sensors cannot be fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI100X340TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.