Airtac JSI Series Standard Cylinder JSI100X175CB
The AirTAC Airtac JSI Series Standard Cylinder JSI100X175CB is a genuine double acting JIS-standard air cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke175 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI100X175CB
Delivering 3927 N of push force at 0.5 MPa, the AirTAC JSI100X175CB is a double-acting JIS-standard profile cylinder built for heavy-duty automation. Its extruded hard-anodized aluminum barrel omits external rods, making it shorter and more compact than an ISO 15552 cylinder of the same 100 mm bore. The integrated two-way piston seal retains grease for a long, low-friction service life.
With a 175 mm stroke and a robust 32 mm piston rod, this unit is engineered for substantial work. Plan for about 2356 N of real work at 0.5 MPa, which safely lifts roughly 200 kg vertically with a 2:1 margin. It features a G1/2 port, M26x1.5 rod thread, and adjustable 33 mm air cushions at both ends. Note that this specific SKU lacks the -S magnet, so it cannot accept CMSE or DMSE position sensors.
Airtac JSI Series Standard Cylinder JSI100X175CB Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI100X175CB |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI100X175CB
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI100X175CB Is Used
Press Fit Assembly
Drives heavy mechanical components into housings on automotive assembly lines using its 3927 N push force at 0.5 MPa.
Injection Mold Clamping
Secures large plastic injection molds during material injection, leveraging the compact profile to save floor space.
Pallet Stopper Gate
Acts as a heavy-duty stopper arm in high-throughput logistics conveyors to halt loaded pallets weighing up to 200 kg.
Is the Airtac JSI Series Standard Cylinder JSI100X175CB the Right Cylinder?
When sizing this 100 mm bore, verify your actual load against the 3927 N push capacity at 0.5 MPa. If your application requires less force, the 80 mm bore offers 2513 N; if you need more, the 125 mm bore provides 6136 N. This model ships with a CB clevis mount, ideal for pivoting loads, but you can also utilize FA flange or TC trunnion accessories.
Remember that a standard cylinder drifts when air is lost or the valve is centered, as the air cushion only decelerates the piston near stroke end rather than locking it. To suspend a load safely during an air failure, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI100X175CB FAQ
This 100 mm bore cylinder delivers 3927 N push and 3574 N pull at 0.5 MPa, 5497 N push and 5003 N pull at 0.7 MPa, with a theoretical max of 801 kgf at 1.0 MPa. It uses a G1/2 air port and features a 32 mm rod with an M26x1.5 thread.
The CB clevis mount allows the cylinder to pivot smoothly during operation. Its JIS-standard extruded profile is shorter and more compact than an ISO 15552 cylinder of the same bore, saving valuable machine space without sacrificing structural strength.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI100X175CB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.