Airtac JSI Series Standard Cylinder JSI100X200TC
The AirTAC Airtac JSI Series Standard Cylinder JSI100X200TC is a genuine double acting JIS-standard air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke200 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI100X200TC
Delivering 3927 N of push force at 0.5 MPa, this double-acting 100 mm bore cylinder is built around an extruded hard-anodized aluminum barrel that sheds external rods for a cleaner profile. As a JIS-standard unit, it is purposefully shorter and more compact than an ISO 15552 cylinder of the same bore, saving valuable space on dense machinery. The two-way piston seal retains grease for long, low-friction life, while the G1/2 port matches the bore's airflow demands.
Because this specific SKU lacks the -S magnet, it cannot host CMSE or DMSE position switches. For sizing real work, plan for roughly 2356 N of usable load at 0.5 MPa, which translates to lifting about 200 kg vertically with a 2:1 safety margin. The 33 mm adjustable air cushions at both ends absorb end-of-stroke impact, and a TC trunnion mount handles pivoting loads.
Airtac JSI Series Standard Cylinder JSI100X200TC Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI100X200TC |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI100X200TC
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI100X200TC Is Used
Pallet Divertor
Uses the 3927 N push force at 0.5 MPa to push heavy wooden pallets cleanly across transfer lines without stalling.
Vertical Crate Lifter
Lifts loaded packaging crates weighing up to 200 kg vertically, benefiting from the 2:1 safety margin on the 100 mm bore.
Press Ejection
Ejects formed metal parts from a 200-ton press, relying on the 33 mm air cushions to prevent endcap damage at high speeds.
Is the Airtac JSI Series Standard Cylinder JSI100X200TC the Right Cylinder?
When sizing this 100 mm bore against its neighbors, step down to an 80 mm unit for 2513 N push at 0.5 MPa, or step up to a 125 mm bore for 6136 N if you need heavier thrust. The TC trunnion mount supplied here is ideal for articulated mechanisms, but remember that a plain cylinder drifts when air is lost or the valve centers; the cushions only decelerate the piston near stroke end and will not hold a load. For vertical or suspended loads, install an external rod lock or a pilot-operated check valve. Since this configuration has no -S magnet, you must choose an -S variant if your application requires electronic position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI100X200TC FAQ
The 100 mm bore features a G1/2 port and a 32 mm rod. It delivers 3927 N push and 3574 N pull at 0.5 MPa, 5497 N push and 5003 N pull at 0.7 MPa, with a theoretical maximum of 801 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so CMSE or DMSE switches will not function. You must select an -S variant to enable side-groove sensor mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI100X200TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.