Airtac JSI Series Standard Cylinder JSI100X220TC
The AirTAC Airtac JSI Series Standard Cylinder JSI100X220TC is a genuine double acting JIS-standard air cylinder with a Ø100mm bore and 220mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke220 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI100X220TC
Delivering 3927 N of push force at 0.5 MPa, this double-acting 100 mm bore cylinder handles heavy industrial loads with ease. The extruded hard-anodized aluminum profile contains no external rods, making the unit shorter and more compact than an ISO 15552 cylinder of the same bore. A heterogeneous two-way piston seal retains grease for a long, low-friction service life. Because this specific SKU lacks the -S magnet, it cannot accept CMSE or DMSE position switches.
Buyers can plan for roughly 2356 N of real work at 0.5 MPa, which translates to lifting about 200 kg vertically with a 2:1 safety margin. The unit features a G1/2 port, an M26x1.5 rod thread, and 33 mm adjustable air cushions at both ends to decelerate the payload smoothly. It operates at speeds between 30 and 800 mm/s.
Airtac JSI Series Standard Cylinder JSI100X220TC Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI100X220TC |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI100X220TC
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI100X220TC Is Used
Stamping Press Feed
Pushes heavy gauge steel blanks into a mechanical press, utilizing the 3927 N push force to overcome material friction.
Pallet Dispenser
Separates empty wooden pallets from a magazine stack, relying on the 220 mm stroke and TC trunnion to pivot the load away.
Injection Mold Ejector
Kicks large molded plastic bins off an injection molding machine platen, safely decelerating the 200 kg mass using the 33 mm cushions.
Is the Airtac JSI Series Standard Cylinder JSI100X220TC the Right Cylinder?
When sizing this 100 mm bore option, consider the neighboring JSI models to match your exact payload. Stepping down to the 80 mm bore drops the 0.5 MPa push force to 2513 N, while moving up to the 125 mm bore increases it to 6136 N. This model includes a TC trunnion mount, which pairs well with the 220 mm stroke for pivoting articulations. Note that a plain cylinder drifts when air is lost or the valve is centered; the end cushions only decelerate the piston near stroke end and do not function as a brake. For suspended or vertical loads that must hold position, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI100X220TC FAQ
This 100 mm bore cylinder features a G1/2 port and an M26x1.5 rod thread. The force output is 3927 N push and 3574 N pull at 0.5 MPa, increasing to 5497 N push and 5003 N pull at 0.7 MPa. The theoretical maximum force at 1.0 MPa is 801 kgf.
No, because this specific SKU does not include the -S magnet option, it cannot accept CMSE or DMSE switches. You would need to select the -S variant of this JIS profile cylinder to enable side-groove sensor mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI100X220TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.