Airtac ACE Compact Cylinder ACE63X80S
The AirTAC Airtac ACE Compact Cylinder ACE63X80S is a genuine double acting ISO 21287 compact air cylinder with a Ø63mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE63X80S
This AirTAC ACE63X80S is a double acting ISO 21287 compact cylinder delivering 1558.6 N of push force at 0.5 MPa, with a matching pull of 1458.1 N. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a full-length unit will not.
The 63 mm bore model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be mounted directly to sense the piston position. With a fixed TPU bumper at both ends, it absorbs energy at stroke ends; for a real-world rule of thumb, plan for about 935 N of usable work at 0.5 MPa, which equates to lifting roughly 95 kg vertically with a 2:1 safety margin.
Airtac ACE Compact Cylinder ACE63X80S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE63X80S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE63X80S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE63X80S Is Used
Fixture Clamping
Use the 1558.6 N push at 0.5 MPa to clamp sheet metal parts in a CNC milling fixture, with the compact body fitting under a low-profile guard.
Sorting Gate
Drive a 80 mm stroke diverter gate on a packaging conveyor, where the short body saves space and the magnet triggers a CMSE switch to confirm position.
Press Ram
Power a small pneumatic press for inserting bushings, relying on the 2182.1 N push at 0.7 MPa to seat parts consistently in a benchtop fixture.
Is the Airtac ACE Compact Cylinder ACE63X80S the Right Cylinder?
For lighter indexing tasks, the 50 mm bore ACE50 offers 981.7 N push at 0.5 MPa, while stepping up to the 80 mm bore ACE80 gives 2513.3 N push for heavier clamping. Since this model has the -S magnet, it is ready for CMSE or DMSE sensors; without the -S code, no magnet is present, so order accordingly. The 1/8" port suits standard flow rates, and the female M10x1.5 rod thread accepts common attachments.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE63X80S FAQ
At 0.5 MPa, push is 1558.6 N and pull is 1458.1 N. At 0.7 MPa, push rises to 2182.1 N and pull to 2041.3 N. The theoretical maximum force is 317.9 kgf at 1.0 MPa. Operating pressure range is 0.15-1.0 MPa (22-145 psi), with proof pressure at 1.5 MPa (215 psi).
The body is about 50% shorter than an ISO 15552 profile cylinder, so it fits in tight jigs and gantries. It uses a hard-anodized aluminium body and a fixed TPU bumper at both ends, which absorbs end-of-stroke energy but does not lock or hold a load. The optional -S magnet on this model allows CMSE or DMSE switches; without -S, no magnet is present.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE63X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.