Airtac ACE Compact Cylinder ACE63X60B
The AirTAC Airtac ACE Compact Cylinder ACE63X60B is a genuine double acting ISO 21287 compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE63X60B
This AirTAC ACE63X60B is a double acting ISO 21287 compact cylinder with a 63 mm bore and a 60 mm stroke, delivering 1558.6 N of push force at 0.5 MPa. Its hard-anodized aluminium body and S45C hard-chrome plated 16 mm rod are built for repetitive cycles in tight automation cells.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits where a full-length actuator will not. With a fixed TPU bumper at both ends, it decelerates the piston at stroke end, and the operating speed range of 30-500 mm/s suits light assembly tasks. For a real workload, plan on about 935 N (roughly 95 kg) of usable force at 0.5 MPa, not the full rating, to keep a safety margin.
Airtac ACE Compact Cylinder ACE63X60B Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE63X60B |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE63X60B
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE63X60B Is Used
Fixture Clamping
Use the 1558.6 N push force at 0.5 MPa to clamp small parts in a CNC fixture, where the compact body fits under a guard door.
Light Conveyor Stop
Actuate a stop gate on a packaging line with a 60 mm stroke, cycling at 30-500 mm/s to sort cartons without impact damage.
Press Ram
Drive a small arbor press or stamping die with the 2182.1 N push at 0.7 MPa, using the fixed TPU bumper to soften the return stroke.
Is the Airtac ACE Compact Cylinder ACE63X60B the Right Cylinder?
For a 63 mm bore, this unit provides a strong mid-range force. If your application needs less thrust, consider the 50 mm bore ACE50X60, which pushes 981.7 N at 0.5 MPa, or step up to the 80 mm bore ACE80X60 for 2513.3 N push at the same pressure. The male rod thread (B code) simplifies mounting with rod-end accessories.
Since this model has no -S code, it has no magnet, so CMSE or DMSE sensors cannot be used. Order the -S version if you need position sensing. The 1/8" port matches common air line sizes for this bore class.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE63X60B FAQ
At 0.5 MPa, push force is 1558.6 N and pull force is 1458.1 N. At 0.7 MPa, push is 2182.1 N and pull is 2041.3 N. The theoretical maximum force is 317.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), with proof pressure at 1.5 MPa (215 psi).
It follows ISO 21287, so its body is about 50% shorter than an ISO 15552 profile cylinder of the same bore. This lets it fit into tight jigs and gantries. It has a fixed TPU bumper at both ends to absorb end-of-stroke energy, and the hard-anodized aluminium body resists wear. Note that this model has no magnet, so order the -S version if you need CMSE or DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE63X60B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.