Airtac ACE Compact Cylinder ACE63X80B
The AirTAC Airtac ACE Compact Cylinder ACE63X80B is a genuine double acting ISO 21287 compact air cylinder with a Ø63mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE63X80B
This AirTAC ACE63X80B is a double acting ISO 21287 compact cylinder with a 63 mm bore and an 80 mm stroke. It delivers 1558.6 N of push force and 1458.1 N of pull force at 0.5 MPa, making it a solid choice for mid-range automation tasks. The male rod thread (B code) simplifies direct coupling to your tooling without needing a rod-end adapter.
The short ISO 21287 body saves about 50% of the mounting length compared to an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding. For a 2:1 safety margin on vertical lifting, this cylinder can handle about 79 kg (1558.6 N / 9.81 / 2). The fixed TPU bumper at both ends absorbs end-of-stroke impact, and the hard-anodized aluminium body with an S45C hard-chrome rod resists wear in continuous cycling.
Airtac ACE Compact Cylinder ACE63X80B Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE63X80B |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE63X80B
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE63X80B Is Used
Fixture Clamping
Use the 1558.6 N push force to clamp sheet metal parts in a CNC milling fixture, holding them securely during drilling operations.
Carton Pusher
In a packaging line, this cylinder pushes filled cartons off a conveyor onto a side chute, with the 80 mm stroke clearing the conveyor width.
Guard Door Actuator
Mount on a machine guard door to slide it open and closed; the compact body fits within the guard frame, and the fixed bumper softens the stop.
Is the Airtac ACE Compact Cylinder ACE63X80B the Right Cylinder?
When sizing, compare this 63 mm bore against the 50 mm bore (981.7 N push) for lighter loads or the 80 mm bore (2513.3 N push) for heavier work. The 80 mm stroke suits short transfers and clamping; the 1/8" port matches standard fittings for this bore class. Since this unit has no -S magnet option, it cannot accept CMSE or DMSE sensors; order the -S code if you need position sensing. Mounting options like FA/FB flanges, LB foot brackets, or CA/CB clevises bolt directly to the ISO 21287 face, so it drops into standard fixtures without custom adapters.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE63X80B FAQ
At 0.5 MPa, push force is 1558.6 N and pull force is 1458.1 N. At 0.7 MPa, push is 2182.1 N and pull is 2041.3 N. The theoretical maximum force is 317.9 kgf at 1.0 MPa. These figures are for the double-acting cylinder, where air extends and retracts the rod.
The ACE63X80B follows ISO 21287, which gives it a compact body about 50% shorter than an ISO 15552 profile cylinder, saving space in tight installations. However, this model has no magnet (no -S code), so it cannot use CMSE or DMSE sensors. The fixed TPU bumper at each end absorbs impact, but it does not lock or hold the load in position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE63X80B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.