Airtac MTF Mini Cylinder MTF25X10SCM
The AirTAC Airtac MTF Mini Cylinder MTF25X10SCM is a genuine single acting, pull (spring return) JIS-standard round-body mini air cylinder with a Ø25mm bore and 10mm stroke, 1/8" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ25 mm
- Stroke10 mm
- Port size1/8"
- Acting typeSingle acting, pull (spring return)
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MTF Mini Cylinder MTF25X10SCM
Generating 153.6 N of pull at 0.5 MPa, this AirTAC MTF25X10SCM mini cylinder is built for single-acting tension and fail-safe-open tasks. It features a JIS-standard round body with a SUS304 stainless barrel and riveted aluminium covers, giving you a shorter mounting envelope than an ISO 6432 unit of the same footprint. The internal spring holds the rod extended at rest, while applying air to the 1/8 inch port retracts it.
Because the spring constantly pushes outward, the quoted pull force is already net of that spring resistance, and a minimum of 0.2 MPa is required to overcome it. For sizing, this yields a safe working load of about 92 N, or roughly 7.8 kg of vertical lift with a 2:1 margin. The 10 mm stroke is capped by fixed TPU bumper pads, and the built-in magnet (-S) supports CMSG, DMSG or EMSG sensors, while the CM round-end back cover suits compact pivot or surface mounting.
Airtac MTF Mini Cylinder MTF25X10SCM Technical Specifications
| Model | Airtac MTF Mini Cylinder MTF25X10SCM |
|---|---|
| Series | MTF JIS mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 153.6 N |
| 0.7 MPa | 236.0 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac MTF Mini Cylinder MTF25X10SCM
| MTF | JIS-standard round-body mini cylinder (single-acting pull, spring-return). |
|---|---|
| 25 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MTF Mini Cylinder MTF25X10SCM Is Used
Tensioning Mechanisms
Uses the 153.6 N pull force to draw back a tension belt or cable against a constant spring release.
Fail-Safe Gates
Holds a guard open via air; the spring automatically drives the rod out to secure the opening upon pressure loss.
Clamp Retraction
Pulls a 10 mm stroke pin out of the way, allowing the internal spring to mechanically extend and clear the part.
Is the Airtac MTF Mini Cylinder MTF25X10SCM the Right Cylinder?
If 93.4 N from the MTF20 is too light, this bore steps up to 153.6 N at 0.5 MPa; should you need substantially more clamping power, the MTF32 provides 266.8 N. Choose this single-acting pull type when a mechanism must spring-open and air-close, such as a tensioning jaw that must mechanically fail to the extended position on air loss. Ensure your supply meets the 0.2 MPa floor to retract the rod. The -S magnet enables position sensing, and the CM back cover provides a neat rear mounting face for tight fixtures.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MTF Mini Cylinder MTF25X10SCM FAQ
It delivers a net pull force of 153.6 N at 0.5 MPa and 236 N at 0.7 MPa. A minimum of 0.2 MPa is required to overcome the internal spring and retract the rod.
The spring extends the rod to its resting position, so on air loss it fails to the extended state. The -S option includes a piston magnet for CMSG, DMSG or EMSG sensors, and the CM round-end back cover aids compact rear mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MTF Mini Cylinder MTF25X10SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.