Airtac MTF Mini Cylinder MTF25X15SCA
The AirTAC Airtac MTF Mini Cylinder MTF25X15SCA is a genuine single acting, pull (spring return) JIS-standard round-body mini air cylinder with a Ø25mm bore and 15mm stroke, 1/8" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ25 mm
- Stroke15 mm
- Port size1/8"
- Acting typeSingle acting, pull (spring return)
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MTF Mini Cylinder MTF25X15SCA
Delivering a net pull of 153.6 N at 0.5 MPa, this single-acting spring-return cylinder uses air to retract the rod and an internal spring to push it back out. The AirTAC MTF25X15SCA features a 25 mm bore, a 10 mm rod, and a 1/8 inch port. Because the spring holds the rod extended at rest, the cylinder fails safely to the open position if air pressure drops. It is not a mid-stroke holding brake.
Built as a JIS-standard round-body mini cylinder with a SUS304 stainless barrel and riveted aluminium covers, the unit is shorter than an ISO 6432 cylinder for the same footprint, resisting mild corrosion and washdown. This specific SKU includes a piston magnet for CMSG, DMSG, or EMSG sensors, and uses a CA pivot back cover. For a practical 2:1 safety margin, it provides an effective vertical lift capacity of about 7.8 kg.
Airtac MTF Mini Cylinder MTF25X15SCA Technical Specifications
| Model | Airtac MTF Mini Cylinder MTF25X15SCA |
|---|---|
| Series | MTF JIS mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 15 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 153.6 N |
| 0.7 MPa | 236.0 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac MTF Mini Cylinder MTF25X15SCA
| MTF | JIS-standard round-body mini cylinder (single-acting pull, spring-return). |
|---|---|
| 25 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MTF Mini Cylinder MTF25X15SCA Is Used
Tension Control
Pulls and holds webbing or wire under tension with 153.6 N force, releasing the load automatically to the extended position upon air loss.
Fail-Safe Open Gate
Holds a 25 mm bore access door closed via air retraction; the internal spring drives the barrier open safely during an air pressure failure.
Product Reject Arm
Retracts a deflector pin out of the conveyor path using compressed air, relying on the spring to snap the arm back into the divert position.
Is the Airtac MTF Mini Cylinder MTF25X15SCA the Right Cylinder?
When sizing this 25 mm bore unit, compare its 153.6 N pull at 0.5 MPa against adjacent bores: step down to the MTF20 for 93.4 N, or up to the MTF32 for 266.8 N. The single-acting pull design fits spring-open, air-close tasks, tensioning, and fail-safe-to-extended operations. Ensure your supply meets the 0.2 MPa minimum floor required to overcome the spring. With the included -S magnet, you can mount position switches, while the CA pivot cover and standard 1/8 inch port simplify integration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MTF Mini Cylinder MTF25X15SCA FAQ
This 25 mm bore cylinder provides a net pull force of 153.6 N at 0.5 MPa and 236 N at 0.7 MPa. It requires a minimum operating pressure of 0.2 MPa to overcome the internal return spring and retract the rod.
The spring holds the rod extended at rest; air pressure pulls it in, meaning it fails to the extended position on air loss. This SKU includes a -S magnet for CMSG, DMSG, or EMSG switches, and features a CA pivot back cover.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MTF Mini Cylinder MTF25X15SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.