Airtac TACED Guided Compact Cylinder TACED100X80S
The AirTAC Airtac TACED Guided Compact Cylinder TACED100X80S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø100mm bore and 80mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ100 mm
- Stroke80 mm
- Port size1/4"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED100X80S
Double acting with a rod leaving both covers, the AirTAC TACED100X80S delivers 3769.9 N in each direction at 0.5 MPa (5277.9 N at 0.7 MPa) because both chambers work on the rod-side area. The 100 mm bore drives a 20 mm rod over an 80 mm stroke, with a female M12x1.75 rod thread and 1/4" ports. Twin guide rods on the yoke stop tooling rotation and carry side load, so a heavy press plate or gripper stays square without an external guide.
The hard-anodized aluminium body with S45C hard-chrome rod is an ISO 21287 compact build that saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into deep presses and gantries where a full-length body will not fit. This -S model carries the optional magnet, so CMSE or DMSE switches mount directly for end-of-stroke signals. In practice, plan on roughly 2262 N of usable force at 0.5 MPa, which lifts about 192 kg vertically with a 2:1 margin.
Airtac TACED Guided Compact Cylinder TACED100X80S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED100X80S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED100X80S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED100X80S Is Used
Heavy press-fit stamping
The equal 3769.9 N force in both directions suits a stamping die station that must press a bushing home and then eject the part with the same through-rod stroke, all inside a short 80 mm envelope.
Pallet lift-and-lower module
With about 192 kg of vertical lift at a 2:1 margin, the double rod raises and lowers a loaded pallet plate in a warehouse transfer unit, while the twin guide yoke keeps the plate level without extra rails.
Monitored clamp on a CNC fixture
The fitted -S magnet accepts CMSE or DMSE switches, so a machining fixture can confirm clamp and unclamp positions electronically on both ends of the 80 mm stroke.
Is the Airtac TACED Guided Compact Cylinder TACED100X80S the Right Cylinder?
At 3769.9 N per side at 0.5 MPa, this is the top of the TACED range; step down to the 63 mm bore (1458.1 N) for lighter clamping or stay here for heavy press and lift work. Strokes run to 100 mm standard on this series, so 80 mm is a standard build. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and the fixed TPU bumper at both ends absorbs end-of-stroke shock. Remember the piston drifts if air is lost, so add a rod lock or pilot check valve for a held load. FB flange mounting is available, and the -S magnet on this model enables CMSE / DMSE switch mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED100X80S FAQ
Yes. Because a rod exits both covers, both strokes work on the rod-side area: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa, equal in extend and retract. At 1.0 MPa the peak is 768.8 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod, and a fixed TPU bumper at each end. This model carries the optional -S magnet, so CMSE reed or DMSE solid-state switches can be clamped onto the body slot for end-of-stroke detection. FB flange mounting is offered; outline dimensions: confirm from datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED100X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.