Airtac SDAD Double Rod Slim Cylinder SDAD100X15S
The AirTAC Airtac SDAD Double Rod Slim Cylinder SDAD100X15S is a genuine double-acting COMPACT cylinder with a piston rod out BOTH ends (Ø100mm bore, 15mm stroke). The through-rod resists twisting and lets you drive a tool on one end while a switch or dog reads position on the other — with identical force in both directions.
- BoreØ100 mm
- Stroke15 mm
- Port sizePT3/8
- Acting typeDouble acting, double rod
- Rod threadM18×1.5 (F) / M26×1.5 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAD Double Rod Slim Cylinder SDAD100X15S
The AirTAC SDAD100X15S is a compact double-acting cylinder featuring a 32mm through-rod exiting both ends of its riveted body. Because the rod occupies both chambers, the annular area is identical in each direction, yielding exactly 3524.9 N of force at 0.5 MPa on both extend and retract strokes. This symmetry prevents twisting and ensures perfectly balanced motion for heavy loads.
Designed for tight spaces, the short 15mm stroke and integrated PT3/8 port keep axial depth minimal. The built-in magnet (-S) supports AirTAC reed or electronic switches for position feedback. End-of-stroke energy is managed solely by a fixed NBR bumper, which decelerates the piston rather than acting as an adjustable air cushion.
Airtac SDAD Double Rod Slim Cylinder SDAD100X15S Technical Specifications
| Model | Airtac SDAD Double Rod Slim Cylinder SDAD100X15S |
|---|---|
| Series | SDAD compact double-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 15 mm |
| Acting type | Double acting, rod both ends |
| Port size | PT3/8 |
| Rod end thread | M18×1.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Because a rod occupies both cylinder chambers, the effective area — and therefore the force — is identical in both directions. Specifications follow the official AirTAC SDAD datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3525 N |
| 0.7 MPa | 4935 N |
| Max (@1.0 MPa) | 719 kgf |
Force uses the annular (rod-side) area on both strokes, so extend and retract match. Actual usable force is lower than theoretical due to friction. Size with a safety margin.
Model Code: Airtac SDAD Double Rod Slim Cylinder SDAD100X15S
| SDAD | Compact double-acting cylinder, rod out both ends. |
|---|---|
| 100 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rods (omit = female thread). |
Thread: PT standard. Related SDA-family variants: SDA (single rod), SSA/STA (single acting), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAD Double Rod Slim Cylinder SDAD100X15S Is Used
Heavy Die Clamping
Applies 3524.9 N of balanced clamping pressure to secure heavy stamping dies, utilizing the through-rod to resist rotational twist during high-vibration press operations.
Symmetric Lift Stations
Drives a vertical lifting platform where equal push and pull forces prevent sagging on the return stroke, lifting payloads up to 179.7 kg with a 2:1 safety margin.
Dual-End Transfer Pusher
Pushes a heavy workpiece forward from one rod end while simultaneously triggering a solid-state electronic switch via a dog mounted on the opposite end.
Is the Airtac SDAD Double Rod Slim Cylinder SDAD100X15S the Right Cylinder?
When sizing this 100mm bore model, compare its 3524.9 N output at 0.5 MPa against the adjacent SDAD80, which provides 2267.8 N. Stepping up to this larger bore gives a substantial 1257.1 N increase in bilateral thrust. A safe working load is roughly 2115 N (about 60% of the 0.5 MPa figure), translating to a vertical lift capacity of 179.7 kg with a 2:1 safety margin.
The through-rod geometry allows mounting a tool on one end while a dog triggers a switch on the opposite side. Remember that a standard cylinder drifts if air pressure drops or the valve centers; use an external rod lock or pilot-operated check valve for load holding. This configuration includes the -S magnet and female M18x1.5 rod-end threads on both sides.
Quick checklist
- ✓ Need equal force both directions?
- ✓ Anti-rotation / dual-end mounting?
- ✓ Space for a rod that exits both ends
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rod exiting both ends.
- check Avoid side load on either rod end.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAD Double Rod Slim Cylinder SDAD100X15S FAQ
The force is equal in both directions due to the double-rod design: 3524.9 N at 0.5 MPa, 4934.8 N at 0.7 MPa, and a theoretical maximum of 719 kgf at 1.0 MPa. The maximum operating pressure is 1.0 MPa.
Yes, the 32mm through-rod protrudes from both ends, allowing you to drive a tool on one side and mount a dog for a reed or electronic switch on the other. This geometry also provides excellent anti-rotation resistance.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAD Cylinders
Request a Quote for Airtac SDAD Double Rod Slim Cylinder SDAD100X15S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.