AirTAC 4V330C-10AI Solenoid Valve, 5/3-way, closed center, PT3/8, AC220V, grommet entry (4V330C10AI)
The AirTAC AirTAC 4V330C-10AI Solenoid Valve, 5/3-way, closed center, PT3/8, AC220V, grommet entry (4V330C10AI) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with 330C10AI ports and an effective area of 21.3 mm² (Cv 1.25). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
- Valve type5/3-way
- Function5/3 double solenoid — Closed center
- Port size330C10AI
- Effective area21.3 mm²
- Flow (Cv)1.25
- Series4V300
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC 4V330C-10AI Solenoid Valve, 5/3-way, closed center, PT3/8, AC220V, grommet entry (4V330C10AI)
The 4V330C-10AI is a 5/3-way double-solenoid pneumatic directional valve that controls double-acting cylinders with a closed center position. When both coils are de-energized, all ports are blocked, locking the cylinder in place to hold a load at mid-stroke. This AC220V model comes with a grommet-style electrical entry, providing a pre-wired 0.5 m flying lead for DIN-style connection.
Built on the 4V300 aluminum-alloy body with 3/8" PT ports, it delivers an effective area of 21.3 mm² (Cv 1.25) and suits cylinders in the ~Ø50–80 mm range. The sliding-spool design responds in 0.05 s or less, operates at 0.15–0.8 MPa, and carries IP65 protection. The AC220V coil draws 4.5 VA, and the valve weighs 450 g.
AirTAC 4V330C-10AI Solenoid Valve, 5/3-way, closed center, PT3/8, AC220V, grommet entry (4V330C10AI) Technical Specifications
| Model | AirTAC 4V330C-10AI Solenoid Valve, 5/3-way, closed center, PT3/8, AC220V, grommet entry (4V330C10AI) |
|---|---|
| Series | 4V300 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Closed center |
| Port size | 330C10AI |
| Exhaust port | 330C10AI |
| Effective area (Cv) | 21.3 mm² (Cv 1.25) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 450 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Flow & Coil Options
| Effective area | 21.3 mm² |
|---|---|
| Flow coefficient | Cv 1.25 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
Model Code: AirTAC 4V330C-10AI Solenoid Valve, 5/3-way, closed center, PT3/8, AC220V, grommet entry (4V330C10AI)
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 3 | Body size (4V300) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -330C10AI | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V310 (single), 4V320 (double), 4V330C/E/P (5/3 center). Add the voltage suffix when ordering.
Where the AirTAC 4V330C-10AI Solenoid Valve, 5/3-way, closed center, PT3/8, AC220V, grommet entry (4V330C10AI) Is Used
Mid-Stroke Clamping
The closed center blocks all ports at rest, holding a pneumatic clamp or press tool at a precise intermediate position without drifting.
Material Handling
Controls lift-and-carry actuators on conveyors where the load must pause mid-travel; the 5/3 center prevents unintended movement.
Machine Tool Actuation
Directs double-acting cylinders on drilling or milling fixtures, stopping the spindle feed at a set depth for consistent cycle control.
Is the AirTAC 4V330C-10AI Solenoid Valve, 5/3-way, closed center, PT3/8, AC220V, grommet entry (4V330C10AI) the Right Valve?
Choose the 4V330C-10AI when your application requires a 5/3 closed-center function with AC220V power and a grommet lead-out. The closed center holds the actuator at mid-stroke by blocking all ports—ideal for pressing or clamping sequences where drift is unacceptable. If your cylinder is smaller (Ø32–40 mm), the 4V200 series (Cv 1.0) may be a better match; for larger bores above Ø80 mm, step up to the 4V400 (Cv 2.82).
For replacement, match five points: body size (4V300), function (30C closed center), port and thread (3/8" PT), coil voltage (AC220V), and electrical entry (grommet with flying lead). The valve can be mounted individually or on a manifold base for multi-station setups.
Quick checklist
- ✓ Required flow (Cv) for cylinder & speed
- ✓ Function: single / double / 5-3 center
- ✓ Coil voltage (DC24 / AC220 …)
- ✓ Port thread (M5 / 1/8 / 1/4 / 3/8 / 1/2)
- ✓ Single valve or manifold base?
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.8 MPa operating pressure.
- check Match coil voltage to your controller output.
- check Use the manual override to test before powering.
- check Fit silencers or fittings to the exhaust ports.
- check Wiring by qualified personnel per AirTAC docs.
AirTAC 4V330C-10AI Solenoid Valve, 5/3-way, closed center, PT3/8, AC220V, grommet entry (4V330C10AI) FAQ
With an effective area of 21.3 mm² (Cv 1.25), it suits double-acting cylinders roughly Ø50–80 mm. For smaller bores a 4V200 may be more responsive; for larger bores consider the 4V400.
When both solenoids are de-energized, the spool moves to the center position and blocks pressure, exhaust, and both cylinder ports. The cylinder holds its last position, but for suspended loads a pilot-operated check valve or mechanical brake is required for guaranteed load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 4V Valves
Request a Quote for AirTAC 4V330C-10AI Solenoid Valve, 5/3-way, closed center, PT3/8, AC220V, grommet entry (4V330C10AI)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.