Airtac ACE Compact Cylinder ACE20X75S
The AirTAC Airtac ACE Compact Cylinder ACE20X75S is a genuine double acting ISO 21287 compact air cylinder with a Ø20mm bore and 75mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ20 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE20X75S
This AirTAC ACE20X75S is a double acting ISO 21287 compact cylinder with a 20 mm bore and 75 mm stroke, delivering 157.1 N of push force at 0.5 MPa. Its short body takes up about 50% less mounting length than an ISO 15552 profile cylinder, making it ideal for tight automation cells and guarding applications.
The hard-anodized aluminium body and S45C hard-chrome plated rod resist wear in high-cycle operations. This model includes the optional -S magnet, so you can mount CMSE or DMSE reed and solid-state switches directly on the body for position sensing. For a 2:1 safety margin, plan to lift about 8 kg vertically with this unit at 0.5 MPa, rather than the full theoretical rating.
Airtac ACE Compact Cylinder ACE20X75S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE20X75S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 118 N |
| 0.7 MPa | 220 N | 165 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE20X75S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 20 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE20X75S Is Used
Parts Ejector
Use the 157.1 N push force to eject small stamped metal parts from a die press at 75 mm stroke, clearing the tool area between cycles.
Carton Tabbing
Drive a tab-folding mechanism on a packaging line, where the compact body fits between guide rails and the 75 mm stroke matches the carton depth.
Sorting Gate
Actuate a diverter gate in a conveyor system, using the fitted -S magnet with a CMSE switch to confirm the gate position at each end of the 75 mm stroke.
Is the Airtac ACE Compact Cylinder ACE20X75S the Right Cylinder?
When sizing, compare this 20 mm bore unit against the smaller 16 mm bore (100.5 N push) and the larger 25 mm bore (245.4 N push) at 0.5 MPa. The 75 mm stroke fits within the 100 mm maximum standard stroke for this bore size. Choose the 25 mm bore if you need more force in a similar envelope, or step down to 16 mm for lighter duty applications. The M5x0.8 port suits small-bore pneumatic circuits, and the female M6x1.0 rod thread accepts standard accessories. Since this unit carries the -S magnet, order CMSE or DMSE sensors separately to confirm position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE20X75S FAQ
At 0.5 MPa, the push force is 157.1 N and the pull force is 117.8 N. At 0.7 MPa, push is 219.9 N and pull is 164.9 N. The theoretical maximum force is 32 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi).
The ACE20X75S body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight spaces behind guards or inside gantries. It has a fixed TPU bumper at both ends to absorb impact, and this model includes the optional -S magnet for mounting CMSE or DMSE sensors. The M5x0.8 port suits small-bore applications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE20X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.