Airtac ACE Compact Cylinder ACE25X60S
The AirTAC Airtac ACE Compact Cylinder ACE25X60S is a genuine double acting ISO 21287 compact air cylinder with a Ø25mm bore and 60mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ25 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE25X60S
This AirTAC ACE25X60S is a double acting ISO 21287 compact cylinder with a 25 mm bore and 60 mm stroke, delivering 245.4 N of push force at 0.5 MPa. Its hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a full-length unit will not.
The S code means the optional -S magnet is fitted, so you can mount CMSE or DMSE reed and solid-state switches directly on the body for position sensing. For real work, plan for about 15 kg of vertical lift at 0.5 MPa (245.4 N divided by 9.81, then halved for a 2:1 safety margin), which helps you match a genuine part weight without over-specifying.
Airtac ACE Compact Cylinder ACE25X60S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE25X60S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE25X60S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE25X60S Is Used
Fixture Clamping
Use the ACE25X60S to clamp small aluminium parts in a CNC fixture. The 245.4 N push at 0.5 MPa holds a 2 kg workpiece securely, while the short body leaves room for tool access.
Light Conveyor Stop
Mount this cylinder on a packaging line to stop lightweight cartons at a merge point. The 60 mm stroke retracts the stop finger quickly, and the optional magnet lets a CMSE switch confirm the stop position.
Guard Door Interlock
In a semi-automatic assembly cell, the ACE25X60S actuates a small safety guard door. Its compact body fits inside the machine frame, and the fixed TPU bumper absorbs the end-of-stroke impact at speeds up to 500 mm/s.
Is the Airtac ACE Compact Cylinder ACE25X60S the Right Cylinder?
Compare this 25 mm bore against a 20 mm bore (157.1 N push at 0.5 MPa) if your load is light, or step up to a 32 mm bore (402.1 N push at 0.5 MPa) for a heavier fixture. The 60 mm stroke is well within the 150 mm maximum standard stroke for this bore, so no custom order is needed. The M5x0.8 port suits small-bore plumbing, and the female M6x1.0 rod thread accepts standard clevis or rod-end accessories. Since the magnet is fitted, you can add CMSE or DMSE switches for end-of-stroke detection, but remember this cylinder does not hold its position when air pressure is lost - use a rod lock or pilot check valve for load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE25X60S FAQ
At 0.5 MPa, the push force is 245.4 N and the pull force is 206.2 N. At 0.7 MPa, push is 343.6 N and pull is 288.6 N. The theoretical maximum force is 50.1 kgf at 1.0 MPa. Operating pressure range is 0.15-1.0 MPa (22-145 psi).
The ACE25X60S has a hard-anodized aluminium body that is about 50% shorter than an ISO 15552 profile cylinder, making it ideal for tight spaces. It uses a fixed TPU bumper at both ends to absorb impact, and the optional -S magnet (fitted here) allows CMSE or DMSE switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE25X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.